Setup, Compatibility & Care
Compatibility: This additive is suitable for use in automatic transmissions and power steering systems. Always consult your vehicle's owner's manual to confirm the correct fluid type for your transmission and power steering system before use. It is generally compatible with all standard ATF fluids.
Setup and Application:
- Ensure Engine is Off: Park your vehicle on a level surface and ensure the engine is turned off.
- Locate Fluid Reservoir: Identify the automatic transmission fluid (ATF) dipstick or the power steering fluid reservoir. Refer to your owner's manual if unsure.
- Determine Dosage: The recommended dosage is typically one 250ml can per 8-10 liters of transmission or power steering fluid. Do not exceed the recommended dosage.
- Add the Additive: Carefully pour the specified amount of Liqui Moly ATF Additive into the transmission fluid dipstick tube or directly into the power steering reservoir.
- Replace Cap/Dipstick: Securely replace the dipstick or reservoir cap.
- Run Engine and Test Drive: Start the engine and allow it to run for a few minutes. Then, take the vehicle for a short test drive (15-20 minutes) to allow the additive to circulate throughout the system.
Care: Once added, no special care is required. The additive works continuously with the fluid. It is recommended to use the product as a preventative measure during regular fluid changes or when issues are first noticed. Store the remaining product in a cool, dry place away from direct sunlight.