Sangamo Choice Rstat3 Digital Electronic Room Thermostat - White
Digital room thermostat features familiar dial control with a digital display to show that the tem...Digital room thermostat features familiar dial control with a digital display to show that the temperature has been set accurately and the thermostat is operating as expected. As well as simple ON or OFF control of your heating system the thermostat can also be set to provide comfort or economy temperature control. 2 wire thermostat is very easy to install and having volt free contacts is suitable for systems with either a combination or normal boiler. If you have a three wire installation, simply cut back and make safe the neutral and this two wire thermostat will give you years of faithful service.Designed to provide simple automatic control of your heating systems, by sensing the air temperature and switching on the heating when the air temperature falls below the thermostat setting and switching off when temperature is reached. Erp: Class 1, +1% Voltage supply: 2 Alkaline batteries 1.5V (type AA) Contact rating: 3A, 250V AC. (Volt free contact) Power reserve: 1 year Temperature adjustment range: 5-30 degree C material type: Thermoplastic
The Sangamo Choice Rstat3 Digital Electronic Room Thermostat is designed for homeowners seeking simple, accurate control over their heating systems. Its key benefit is providing clear digital feedback on temperature settings and operation, with a user-friendly dial for easy adjustment. A potential caveat for some users is its two-wire installation, which may require minor modification for three-wire systems.
All features
Colour
White
Model Part Number
RSTAT3
Brand
Sangamo
Extended Product Information
FAQs
How do I set the temperature?
Simply turn the dial to your desired temperature. The digital display will show the selected temperature between 5°C and 30°C.
What type of batteries does it use?
It uses 2x AA Alkaline batteries (1.5V).
How long do the batteries last?
The batteries provide a power reserve of approximately one year under normal operation.
Can this thermostat be used with a combination boiler?
Yes, the Sangamo Choice Rstat3 features volt-free contacts, making it suitable for systems with either a combination or a normal boiler.
What if I have a three-wire installation?
For three-wire systems, you will need to cut back and make safe the neutral wire, ensuring only the two required wires are connected to the thermostat.
How do I switch between comfort and economy modes?
The thermostat automatically adjusts between comfort and economy based on the temperature setting. A lower dial setting typically corresponds to an economy mode, while a higher setting is for comfort.
Is this a programmable thermostat?
No, the Sangamo Choice Rstat3 is a non-programmable digital thermostat. It offers simple, manual control with a digital display.
Troubleshooting
Thermostat not turning on heating
Check that the batteries are correctly inserted and have sufficient charge. Verify the room temperature is below the set point. Ensure wiring connections are secure and correct for your system type.
Heating stays on constantly
Confirm the room temperature is actually below the set point. Check wiring connections. If the issue persists, there may be a fault with the thermostat or the heating system itself.
Digital display is blank
Replace the AA batteries. Ensure batteries are inserted with the correct polarity.
Inaccurate temperature readings
Ensure the thermostat is not located near heat sources (radiators, direct sunlight) or drafts, which can affect its sensor. Allow the thermostat time to acclimate to the room temperature after installation or battery change.
Pros and Cons
Pros
Easy to install with a simple two-wire connection.
Clear digital display provides accurate temperature feedback.
Intuitive dial control for straightforward temperature adjustments.
Offers both comfort and economy temperature settings for energy efficiency.
Suitable for a wide range of heating systems due to volt-free contacts.
Cons
May require modification for older three-wire installations.
Relies on battery power, necessitating periodic battery replacement.
Lacks advanced programming features found in more complex smart thermostats.
Limited contact rating (3A, 250V AC) may not suit all high-power heating elements.
Setup, Compatibility & Care
Setup:
Ensure power to your existing thermostat and heating system is switched off at the mains.
Carefully disconnect the wires from your old thermostat. Note their positions.
Connect the two wires from your heating system to the corresponding terminals on the Sangamo Rstat3. If you have a three-wire system, you will need to cut back and make safe the neutral wire, ensuring only the two required wires are connected.
Install the thermostat onto the wall mounting.
Insert 2x AA Alkaline batteries (1.5V).
Restore power to your heating system.
Compatibility:
Suitable for systems with either a combination or normal boiler.
Operates with volt-free contacts.
For three-wire installations, the neutral wire needs to be made safe.
Care:
Clean the thermostat periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
Replace batteries when indicated or annually to maintain the one-year power reserve.
Ensure the thermostat is not obstructed by curtains or furniture, as this can affect temperature sensing.