Draper Sanding Roller, 310W - 90469

The Draper Sanding Roller is designed for use with sanding flaps measuring 5-60mm.

Use the spindle lock to hold the spindle in place, and then unscrew the existing flap. Install the new flap and secure it.

Yes, it can be used on metal, but ensure that you are using appropriate sanding flaps for metal and follow all safety precautions.

Always wear safety glasses, a dust mask, and hearing protection. Ensure the work area is well-ventilated.

The speed can be adjusted using the variable speed control, typically located on the tool's handle or body.

Replacement sanding flaps can be found at most hardware stores or online retailers that sell tools and accessories.

Clean the tool after each use to remove dust and debris. Wipe it down with a dry cloth.

Please refer to the product documentation or contact the manufacturer for warranty information.

Check the power cord and outlet. Ensure the power switch is in the 'on' position.

Check the sanding flap. Replace it if it is worn or clogged.

Ensure the sanding flap is correctly installed and balanced. Check the spindle for damage.

Check the dust extraction hose for blockages. Ensure the extraction system is powered on and functioning correctly.