Guardian Click Vinyl Flooring Tiles - 625mm x 125mm Witchita Beech Herringbone - Pack of 20

Yes, provided the existing tile is flat, stable, and firmly bonded. If the grout lines are deep, you should fill them to create a level surface.

Yes, always leave a small expansion gap (typically 6-8mm) around the perimeter of the room to allow for natural floor movement.

These tiles are stable, but they should not be exposed to direct, extreme sunlight for prolonged periods, as extreme heat can affect any vinyl product.

While the click system is designed for a floating installation, replacing a single tile in the center of the room can be difficult; it is easier if you can work back to the edge of the room.

The integrated underlayment provides significant sound dampening for standard domestic use, effectively reducing step noise within the room and to floors below.

Check that the click-lock joint is fully engaged. If a gap persists, ensure the subfloor is level and the tile is not being obstructed by floor debris.

This is usually caused by an uneven subfloor. Remove the affected tiles and use a self-leveling compound on the subfloor before reinstalling.

This is often caused by soap residue from improper cleaning products. Use a pH-neutral floor cleaner and ensure the floor is rinsed or dried properly.