Kenable Twin Phono Audio Cable - Black

OFC cables provide a purer signal path, reducing signal loss and degradation, which results in clearer and more accurate audio reproduction compared to standard copper cables.

The earth tag wire is essential for grounding specific audio equipment, most notably turntables and some car audio components, to eliminate or significantly reduce electrical hum and interference.

No, this cable is designed specifically for analog stereo audio signals using RCA (Phono) connectors. It is not suitable for digital audio formats.

Gold plating offers superior corrosion resistance and conductivity compared to nickel plating, ensuring a more reliable and long-lasting connection with less signal degradation over time.

Typically, the white or black RCA plug carries the Left audio channel, and the red plug carries the Right audio channel. Ensure you match these to the corresponding inputs and outputs on your equipment.

Full shielding means the OFC conductors are wrapped in a protective layer (often braided or foil) to block external electromagnetic and radio frequency interference, thus preserving the integrity of the audio signal.

The 1.5-meter length is standard for many interconnects and suitable for connecting components that are relatively close to each other. For components placed further apart, a longer cable might be necessary.

Ensure all RCA plugs are fully inserted into both the source and destination devices. Check that the correct input source is selected on your amplifier/receiver. Verify that the cable is not damaged. For turntables, ensure the earth wire is securely connected.

This is often due to a poor ground connection. Ensure the earth tag wire is firmly attached to the grounding terminal on your amplifier or head unit. Try connecting the cable to a different power outlet to rule out power supply interference. If using with a turntable, ensure the turntable itself is properly grounded.

Check that the Left and Right RCA plugs are connected to the correct corresponding inputs/outputs. Ensure the cable connectors are clean and free from debris. The source device or playback equipment may be the cause of distortion.