Best current price£6.94from eBay
Shopping.co.uk recommended and popular offers
eBay£6.94Visit shop 1mX45cm ARAGON BARK BROWN SELF ADHESIVE STICKY BACK PLASTIC VINYL FABLON D-C-FIX
Visit shop
B&Q£6.99Visit shop B&Q - Aragon Sticky Back Furniture Wrap (L)200Cm (W)45Cm
Visit shop7 offers from £6.94 - £13.75
View price history by clicking the chart icon.
The D-C-Fix Aragon self-adhesive vinyl film is the ideal solution for DIY enthusiasts and homeowners looking to quickly update furniture, drawers, and shelves without the need for painting or professional help. It provides a durable, heat-resistant, and aesthetically pleasing finish with a simple peel-and-stick application; however, it requires a clean, completely flat, and dry surface to ensure long-term adhesion and a smooth result.
| Model Part Number | F346-0539 |
|---|---|
| Brand | D-C-Fix |
It is heat resistant up to 75 degrees Celsius, but it is not intended for high-heat cooking areas or direct contact with hot pans.
In most cases, the film can be removed without significant residue, though the ease of removal depends on the age and surface type of the underlying furniture.
Yes, the vinyl material is water-resistant, making it excellent for surfaces that need occasional wiping.
Yes, provided the paint is fully cured, smooth, and not flaking. Always perform a patch test first.
No, the package includes the film only. A plastic smoother or soft dry cloth is recommended for best results.
Gently lift the edge nearest to the bubble and smooth it out again, or use a fine needle to prick a tiny hole in the bubble and press the air out.
Ensure the surface was cleaned of all grease or dust; use a hair dryer on a low setting to warm the adhesive slightly to help it bond better at the corners.
To ensure success, begin by thoroughly cleaning the surface to remove dust, grease, and debris. Ensure the substrate is completely dry before beginning application. Cut the film slightly larger than the area you intend to cover. Peel back a small section of the backing paper and apply, using a squeegee or soft cloth to smooth out air bubbles as you progress. If the film is misaligned, gently peel it back and re-apply. Once in place, trim any excess material with a sharp utility knife. To maintain, simply wipe with a damp cloth; avoid harsh chemicals or abrasive scouring pads to keep the finish intact.
