Fiberglass Chopped Strand Matting - 450gsm - 6.75kg

No, the 450gsm variant is designed specifically for light foot traffic. For heavy-duty areas, you should use a heavier grade of matting.

One roll provides approximately 12 square metres of coverage.

While it is engineered for ProGRP systems, it is generally compatible with most standard roofing polyester resins, but testing on a small sample area is recommended.

You should wear gloves, long sleeves, eye protection, and a mask to prevent skin irritation and inhalation of fiberglass dust.

Yes, it is standard practice to overlap the edges of the matting by at least 50mm to ensure a continuous, waterproof seam.

Keep it in its original packaging or a sealed plastic bag in a dry, dark place to keep it free from moisture and debris.

You are likely using insufficient resin; apply more until the fibers appear fully wetted and clear.

Use a metal consolidation roller immediately after wetting the matting to push air out from under the fibers.

Use a sharper cutting tool and handle the cut pieces as little as possible before placing them on the deck.