Best current price£27.99from eBay
Shopping.co.uk recommended and popular offers
eBay£27.99Visit shop 3x Bartoline Wood Glue Water Resistant Resin Based Drying PVA Adhesive 500mL
Visit shop
B&Q£31.99Visit shop B&Q - 3X Wood Glue Water Resistant Resin Based Drying Pva Adhesive 500Ml
Visit shop3 offers from £27.99 - £31.99
View price history by clicking the chart icon.
Bartoline Wood Glue is an ideal choice for woodworkers and DIY enthusiasts who need a reliable, professional-grade adhesive for indoor projects, particularly in high-humidity areas like kitchens and bathrooms. It delivers rapid bond strength and dries clear for a clean finish, though users should be aware that while it is water-resistant, it is not intended for continuous underwater submersion.
| Model Part Number | null} </code> |
|---|---|
| Brand | Bartoline |
No, this adhesive is rated D3 (water-resistant), not D4 (waterproof). It is designed for high-humidity interior use, not for direct exposure to exterior elements.
This product is intended for wood assembly and furniture. It is not recommended for items that will come into direct contact with food.
While the bond sets quickly, you should allow 24 hours for the glue to reach its maximum cured strength.
For best adhesion on oily woods, lightly sand the surfaces and wipe with a solvent to remove natural oils before applying the glue.
Dried glue is difficult to remove; it is best to clean tools with a damp cloth immediately after use. Once hardened, you may need to scrape it off carefully.
If the glue was not wiped away while wet, carefully scrape the dried residue with a chisel or sand it down with fine-grit sandpaper.
Ensure that both surfaces were clean and dry. Check that you applied enough pressure with clamps and allowed sufficient drying time before removing them.
The glue may have been stored in extreme temperatures. Keep it in a room-temperature environment to maintain its proper viscosity.
To achieve the best results, ensure all workpieces are clean, free of dust, and completely dry before application. Apply a uniform layer of glue to one or both surfaces. Once joined, use clamps or weights to maintain firm pressure across the joint. If excess glue squeezes out of the seam, wipe it away immediately with a damp cloth; once dry, it becomes significantly harder to remove. Store the container in a cool, dry place and ensure the cap is tightened securely to prevent the adhesive from drying out inside the bottle.
