Prym Duchesse Satin Bias Binding Tape - Steel Blue

Bias binding is fabric cut at a 45-degree angle to the grainline of the fabric. This diagonal cut allows the fabric to stretch and curve, making it ideal for finishing edges on rounded or angled seams without puckering.

While specific widths can vary by product batch, bias binding is often around 20-25mm wide when unfolded, typically folding to create a 5-6mm finished edge when applied.

While primarily designed for dressmaking and apparel, it can be used for decorative edging on quilts or other home decor items where a satin finish is desired. However, for standard quilting, cotton binding is more common.

Measure the total length of the edge you wish to bind. Add an extra 5-10% for seams and potential mistakes. For example, a 1-meter edge would require approximately 1.1 meters of binding.

As it is a satin finish, dyeing may be difficult and could damage the fabric or result in an uneven color. It is best to purchase the color that suits your project.

The neatest way is to overlap the ends by about 1 inch, forming a diagonal seam. Trim the excess, and press the seam open. Ensure the overlap is placed on a straight section if possible, or a less visible area.

Ensure you are using gentle tension on your sewing machine. Slightly increase the curve of your stitching line, or use a walking foot to help feed the fabric evenly. Baste the binding in place before machine stitching.

Use plenty of pins or clips to secure the binding in place before sewing. Consider using a temporary fabric adhesive or basting stitches. A microtex needle can also provide better grip on slippery fabrics.

Use a sharp, fine needle (size 70/10 or 80/12 microtex is recommended). Ensure your upper thread tension is correctly balanced with your bobbin tension. Use good quality sewing thread.

Dye lots can vary slightly. If precise color matching is critical for a large project, purchase all the bias binding needed at once. Check the original packaging for any lot information if available.