Best current price£55.43from eBay
Shopping.co.uk recommended and popular offers
eBay£55.43Visit shop 1 x 4 Litre Cube - Silkolene Comp 2 Fully Synthetic Motorbike Engine Oil
Visit shopeBay£55.91Visit shop Silkolene Comp 2 2T 2 Stroke Motorcycle Engine Oil Fuchs 4 Litres 4L LubeCube
Visit shop6 offers from £55.43 - £123.92
View price history by clicking the chart icon.
The Silkolene Comp 2 2T 2 Stroke Motorcycle Engine Oil is designed for competition off-road motorcycles that require a tank mix oil. Its key benefit is providing a clean burn with reduced plug fouling and internal corrosion protection, thanks to its ester-based synthetic formulation with Electrosyntec Technology. A potential caveat is that it is specifically formulated for competition use and may not be optimal for all 2-stroke engines.
| Model Part Number | 602013422 |
|---|---|
| Brand | Silkolene |
The correct oil-to-fuel ratio depends on your specific motorcycle model. Always refer to your motorcycle's owner's manual for the manufacturer's recommended ratio, which typically ranges from 32:1 to 50:1.
Silkolene Comp 2 is formulated for competition off-road use. While it may function in some street bikes, it's recommended to use an oil specifically designed for street applications unless your street bike's manual explicitly approves this competition oil.
No, Silkolene Comp 2 is a tank mix oil and is not designed for use in automatic oil injection systems or direct fuel injection systems unless explicitly stated by the manufacturer and vehicle manual.
An 'ash-less' lubricant means it burns cleanly without leaving significant solid residue (ash) in the combustion chamber. This helps prevent deposits and maintain engine cleanliness.
Store the oil in its original, tightly sealed container in a cool, dry place away from direct sunlight and extreme temperatures. Do not store pre-mixed fuel for extended periods.
Yes, the clean-burn formulation of Silkolene Comp 2 is specifically designed to minimize plug fouling, especially under demanding competition conditions.
Ensure the oil-to-fuel ratio is correct as per manufacturer's recommendation. Verify the engine is not running too rich or has other combustion issues. Check for potential engine wear that might cause oil consumption.
Double-check the fuel-to-oil ratio; a ratio too rich in oil can cause fouling. Ensure the spark plug is the correct heat range for your engine and riding conditions. Clean or replace the fouled plug.
Verify the fuel mixture is correctly prepared and that fresh gasoline is used. Check for air leaks in the intake system. Ensure the engine is not overheating. Inspect the exhaust system for blockages.
Ensure the fuel mixture was properly prepared and that the oil provided adequate protection. If corrosion is suspected, consult a mechanic for inspection and potential cleaning or repair.
Setup:
Silkolene Comp 2 is a tank mix oil, meaning it must be accurately pre-mixed with gasoline before being added to the fuel tank. Always follow the motorcycle manufacturer's recommended fuel-to-oil ratio. Typical ratios range from 32:1 to 50:1 (gasoline:oil), but refer to your specific vehicle's manual for the precise requirement.
Compatibility:
Care & Storage:
