Leyland Trade Contract Matt Wall & Ceiling Emulsion Paint - Grey, 12L

This paint is designed for interior walls and ceilings, including plaster, drywall, and previously painted surfaces.

Priming is recommended for new or porous surfaces to improve adhesion and coverage.

Typically, two coats are sufficient. However, darker shades or existing colors might require more.

Drying time is typically 2-4 hours between coats, but this may vary depending on environmental conditions. Always refer to the product label.

Clean brushes and rollers with water immediately after use.

This paint is suitable for interior use, but its matt finish may not be as moisture-resistant as other finishes. Adequate ventilation is recommended in bathrooms and kitchens.

Coverage rates can vary based on surface porosity and application method. The product label should provide specific guidance.

Ensure the paint is thoroughly mixed. Apply a second coat, allowing the first coat to dry completely. Use consistent brush strokes or roller technique.

Apply a second coat of paint. For very dark existing colors, consider using a primer before applying the Leyland Trade Contract Matt Emulsion.

Ensure adequate ventilation. Check the temperature and humidity levels in the room. Allow more time for drying between coats.