Wave Pacific - Brown Rattan

Heating time varies based on ambient temperature and initial water temperature. Typically, it can take between 12-24 hours for the water to reach the maximum temperature of 40°C from cold fill.

The Wave Pacific is designed to comfortably seat up to six people, offering ample space for a social experience.

Power consumption varies depending on whether the heater or massage jets are in use. Refer to the product's technical specifications for detailed power requirements and estimated energy usage.

Yes, the Pacific features automatic FrostFree™ protection, designed to prevent freezing. However, for prolonged periods of sub-zero temperatures or when not in use, it's recommended to drain and store the hot tub according to the manufacturer's instructions.

It is generally recommended to drain and refill the hot tub every 1-3 months, depending on usage frequency and how well water chemistry is maintained. Regular filter cleaning and water testing will extend the time between full drains.

The Waveflow™ technology works in conjunction with a filter cartridge. This cartridge needs to be cleaned regularly (e.g., weekly) and replaced periodically (e.g., every 1-3 months) to ensure efficient water circulation and filtration.

The setup is designed to be straightforward. It involves inflating the unit, connecting the integrated control pack, filling with water, and connecting to power. Most users can set it up within an hour.

Ensure the air valve is fully open and the pump is securely attached. Check for any visible leaks or punctures and repair if necessary.

Verify that the heater is switched on and that the temperature setting is correct. Check the power supply and ensure the GFCI breaker has not tripped. Ensure the water level is adequate, as some heaters have low-water cut-off.

Check that the pump is running and that the jet nozzles are not blocked. Ensure the filter is clean, as a clogged filter can restrict water flow. Verify that the massage system is activated.

Consult the user manual for a specific breakdown of error codes and their corresponding solutions. Common codes relate to filtration, heating, or sensor issues.

This typically indicates an imbalance in water chemistry. Test the water and adjust sanitizer, pH, and alkalinity levels. Perform a shock treatment if necessary and clean the filter.