Laser Crankshaft Pulley Holding Tool - Renault - 8002

The tool is designed for the Renault 0.9L H4BT and 1.2L H5FT petrol engines.

No, this tool is specifically designed for the petrol engines mentioned and is not compatible with diesel variants.

It prevents the crankshaft pulley from turning when loosening or tightening the central fixing bolt, making the job much easier and safer.

Compatibility is limited to the specific model years and engine codes listed in the product description. Always check your vehicle's engine code.

Clean with a dry or slightly damp cloth after use and store in a dry place to prevent rust.

It is equivalent to OEM MOT.2054, MOT 2025, MOT.2006, and 281589004000.

While these are the primary applications, always confirm your specific engine's crankshaft pulley design matches the tool's interface.

Verify you are using the correct tool (8002) for the specified engine and vehicle. Ensure the pulley is the standard type for the listed applications. Check for any obstructions or damage on the pulley face.

Ensure all securing bolts for the holding tool are fully tightened. Check that the tool is seated flat against the pulley. For extremely stubborn bolts, consider using a breaker bar on the tool, but be mindful of potential damage to the tool or engine components.

Confirm the holding tool is securely engaged. Use a suitable breaker bar and extension on your socket wrench. Ensure you are turning the bolt in the correct direction (usually counter-clockwise to loosen).