Hycote Touch Up Spray Paint 400ml - Purple Velvet Metallic

Best current price£7.99from My Motor World
Best offers
Shopping.co.uk recommended and popular offers
Hycote Purple Ford Velvet Spray Paint 400Ml
Visit shop
Best current price£7.99from My Motor World
Shopping.co.uk recommended and popular offers
Hycote Purple Ford Velvet Spray Paint 400Ml
Visit shop5 offers from £7.99 - £12.99
View price history by clicking the chart icon.
This guide is for anyone using Hycote Touch Up Spray Paint (400ml) in Purple Velvet Metallic, designed to refresh and protect metallic and rigid plastic surfaces. It offers a convenient solution for minor repairs and cosmetic touch-ups, enhancing gloss levels and providing environmental protection. Note that optimal results require proper surface preparation and the use of compatible primers and lacquers.
| Model Part Number | HYCXUK1024 |
|---|---|
| Brand | Hycote |
Hycote Touch Up Spray Paint is designed for use on metallic and rigid plastic surfaces when used with the appropriate primers.
Yes, it is recommended to use a compatible primer for optimal adhesion and to ensure the best results.
Apply thin, even coats until the desired coverage is achieved. Allow each coat to dry before applying the next, typically two to three coats.
Yes, as long as the bumper is made of a rigid plastic suitable for painting and has been properly prepared with the correct primer.
Drying times vary depending on temperature and humidity. Refer to the product label for specific drying times, but generally, allow at least 30 minutes between coats and several hours for the final coat to cure fully.
Yes, applying a lacquer over metallic finishes is recommended to enhance gloss levels and provide additional protection.
Store the spray paint in a cool, dry place away from direct sunlight and extreme temperatures.
Try cleaning the nozzle with a solvent or a fine pin. Invert the can and spray after each use to prevent clogging.
Apply thinner coats and ensure proper distance from the surface. Allow each coat to dry before applying the next.
Ensure the correct color code is used. Consider professional color matching or testing in an inconspicuous area first.
Properly prepare the surface by cleaning, sanding, and priming. Ensure compatibility with the surface material.
Clean the nozzle with a solvent or a fine pin. Invert the can and spray after each use.