Wavin Osma Push-Fit Waste - 32mm - 90 Degree
Best current price£1.72from Travis Perkins
Best offers
Shopping.co.uk recommended and popular offers
Travis Perkins£1.72Visit shop Wavin Osma Waste push-fit knuckle bend 90 degree 32mm white
Visit shopTravis Perkins£1.72Visit shop One Offer
1 offer from £1.72
View price history by clicking the chart icon.
Travis PerkinsWavin Osma Waste push-fit knuckle bend 90 degree 32mm white
£30.00 delivery
£1.72
Visit shop
Product Information
Full details
This Wavin Osma Push-Fit Waste fitting, specifically the 32mm 90-degree bend, is designed for plumbers and DIY enthusiasts seeking a fast and cost-effective solution for waste pipe installations. Its key benefit is the rapid push-fit assembly, which significantly reduces installation time and labor costs. A potential caveat to consider is ensuring the pipe is fully inserted into the socket for a secure, leak-free connection. The system is manufactured from durable polypropylene, offering strength and low maintenance.
All features
| Model Part Number | 614916 |
|---|---|
| Brand | Wavin |
Extended Product Information
FAQs
What is the main advantage of using push-fit waste fittings?
The primary advantage is the speed and ease of installation. Push-fit systems eliminate the need for solvent cements or glues, saving significant time and reducing labor costs.
Can this fitting be used with hot water?
Yes, the fitting is suitable for intermittent discharges of water up to 90°C. It is not designed for continuous hot water flow.
What sizes are available for the Wavin Osma Push-Fit Waste system?
The system is available in 32mm, 40mm, and 50mm diameters.
What colors are available?
This system is available in black, grey, and white.
Do I need any special tools to install this fitting?
No special tools are required for installation. A clean pipe end and firm pressure are usually sufficient. A pipe cutter might be needed to prepare the pipe end.
How do I ensure a leak-proof connection?
Ensure the pipe end is clean, square, and free from burrs. Push the pipe firmly and squarely into the fitting socket until it is fully home. The internal seal will create the watertight connection.
What is the warranty period for this product?
Specific warranty information should be checked with the retailer or Wavin directly, as it can vary by region and specific product line.
Troubleshooting
Leak at the joint
Ensure the pipe is pushed fully into the socket. Check the pipe end for damage or debris, and clean if necessary. Verify the pipe is inserted straight.
Difficulty inserting pipe
Ensure the pipe end is clean and not deformed. A small amount of water-based lubricant (not silicone or petroleum-based) can aid insertion, but it should not be necessary for a correctly prepared pipe.
Fitting not seating properly
Confirm you are using the correct size pipe (32mm) and that it meets relevant standards. Check for any obstructions within the fitting socket.
Pros and Cons
Pros
- Significantly reduces installation time and labor costs due to push-fit technology.
- Durable and robust construction from polypropylene ensures longevity.
- Low maintenance requirements, saving on upkeep.
- Kitemarked certification provides assurance of quality and compliance.
- Easy to use, requiring no specialized tools or adhesives.
Cons
- Requires careful pipe insertion to ensure a secure, leak-free seal.
- Not designed for continuous high-temperature discharge.
- Polypropylene can be susceptible to damage from sharp impacts.
- Limited to specific pipe sizes and connection types.
Setup, Compatibility & Care
Setup: To install, ensure the end of the waste pipe is clean, dry, and free from burrs. Push the pipe firmly into the socket of the 90-degree fitting until it is fully seated. The integral seal will create a watertight connection. For disassembly, a simple twist-and-pull action is usually sufficient.
Compatibility: This 32mm fitting is designed to connect with standard 32mm plastic waste pipes manufactured to BS EN 1451-1:2000 and similar standards. It is suitable for use with intermittent discharges of water up to 90°C.
Care: The Wavin Osma Push-Fit Waste requires minimal care. Periodically check connections for security. Cleaning can be done with a damp cloth. Avoid using abrasive cleaners or solvents, which could damage the polypropylene material.