Best current price£11.99from Rinkit
Shopping.co.uk recommended and popular offers
Rinkit£11.99Visit shop Harbour Housewares Black Universal Garage Door Seal Strip - 8Ft / 2.44M
Visit shop
B&Q£15.99Visit shop B&Q - Universal Garage Door Seal Strip8Ft / 2.44M
Visit shop3 offers from £11.99 - £20.49
View price history by clicking the chart icon.
The Harbour Housewares Universal Garage Door Seal Strip is designed for homeowners looking to protect their garage interior from environmental elements like water, dust, pests, and cold air draughts. It provides a simple, cost-effective way to improve garage insulation and hygiene, though users should ensure their garage floor is clean and dry to allow the adhesive to bond correctly for long-term durability.
| Model Part Number | ST-HH-DH5342 |
|---|---|
| Brand | Harbour Housewares |
Yes, the flexible nature of the material and the grooved underside allow the strip to conform to minor imperfections in concrete and tile floors.
The kit includes the 300ml adhesive tube, but you will need a standard sealant/caulking gun to apply it.
Yes, it is compatible with both manual and automatic (motorised) garage doors.
The strip is 8 feet (approx. 2.4 metres) in length.
The material is designed to act as a weather barrier to prevent wind-driven rain and moisture from entering your garage.
If you need to remove the seal in the future, you may need a sharp scraper to carefully peel the strip away and an adhesive remover to clean any residue from the floor.
Ensure the floor is completely dry and free of oil or dust before application. If necessary, degrease the concrete surface with a cleaner and allow to dry thoroughly.
Apply additional adhesive to the lifted areas and weigh the strip down with heavy objects for 24 hours until fully cured.
To install, first ensure the threshold of your garage is completely free of dirt, oil, and debris. Measure the door opening width and cut the strip to the desired length using a heavy-duty utility knife. Apply the provided 300ml adhesive in a zig-zag pattern along the underside of the strip or directly onto the clean floor, then press the strip firmly into place. Avoid driving over the seal for at least 24 hours to ensure the adhesive cures completely. To maintain the seal, wipe it down periodically with a damp cloth to remove accumulated grit or debris that could affect the bond over time.
