Best current price£25.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£25.99Visit shop Wynns Electrical Contact Cleaner Spray Switch Relay Circuit Dirt Remover 2X500ml 5056820564951
Visit shop
B&Q£26.49Visit shop B&Q - Electrical Contact Cleaner Spray Switch Relay Circuit Dirt Remover 2X500Ml
Visit shop4 offers from £25.99 - £26.49
View price history by clicking the chart icon.
Wynn's Electrical Contact Cleaner is a high-performance solution designed for automotive technicians, hobbyists, and electronics enthusiasts who need to restore conductivity to sensitive components by removing stubborn residues. Its primary benefit is the rapid dissolution of oil, grease, and oxide deposits without damaging delicate circuitry; however, users must strictly adhere to safety protocols by ensuring all equipment is powered down and fully cooled before application to prevent electrical hazards or ignition.
| Model Part Number | 10679 |
|---|---|
| Brand | Wynns |
No. Always disconnect power and ensure components are cool before application to avoid the risk of electrical shorting or fire.
While generally safe for electronics-grade plastics, it is best to perform a small spot test on an inconspicuous area if you are concerned about a specific material.
Spray the disc lightly and wipe gently from the center to the outer edge using a clean, lint-free cloth.
No, the cleaner is designed to evaporate completely, leaving no residue behind.
Yes, it is highly effective for cleaning tape heads and read/write heads in audio and video equipment.
Wait until the cleaner has completely evaporated and all solvent vapors have fully dissipated.
Allow the initial application to dry, then repeat the process with a gentle scrub using a soft, non-abrasive brush.
Wipe away any overspray immediately with a dry, lint-free cloth to prevent clouding of certain sensitive plastics.
Before using the cleaner, ensure the equipment is disconnected from its power source and that all internal components have cooled to room temperature. Shake the aerosol can vigorously before use. Hold the can in an upright position and apply the spray to the target contact points. Allow sufficient time for the solvent to evaporate completely and for all vapors to dissipate before re-energizing the equipment. Store the can in a cool, dry place away from direct heat or open flames. Compatibility includes most plastics, metals, and rubber components typically found in automotive and standard consumer electronics.
