DS18 PRO-ZT6 - 6.5-Inch - 2-Way - 450W
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The DS18 PRO-ZT6 is designed for audio enthusiasts and car audio installers looking to achieve high-output, full-range sound from a compact 6.5-inch footprint. Its primary benefit is the combination of a robust mid-range driver with an integrated bullet tweeter, which simplifies complex installations while delivering 225W RMS of power. While it offers impressive durability and performance, users should note that as a pro-audio style speaker, it requires proper tuning and amplification to avoid harshness at high volumes compared to standard soft-dome factory speakers.
All features
| Model Part Number | PRO-ZT6 |
|---|---|
| Brand | DS18 |
Extended Product Information
FAQs
Does this speaker require an external crossover?
The PRO-ZT6 features an integrated design, but you should still use your amplifier's or head unit's high-pass filter to protect the speaker from low-frequency distortion.
Can these be used in a marine application?
Yes, the speakers are water-resistant, making them suitable for use in marine environments provided they are not subjected to direct, constant submersion.
What is the mounting depth of the PRO-ZT6?
Please consult your specific installation manual or vehicle data, as the neodymium magnet assembly is compact but still requires standard mid-range clearance.
Are these speakers sold as a pair?
DS18 PRO-ZT6 speakers are typically sold individually; check your specific purchase listing to confirm if you are buying a single unit or a set.
Will these fit in my factory door speaker holes?
The PRO-ZT6 is a standard 6.5-inch size, but due to the bullet tweeter and motor structure, you may need to ensure your mounting depth and hole diameter are sufficient.
Troubleshooting
Sound is distorted at high volume
Check your amplifier gain settings and ensure the high-pass filter (HPF) is set appropriately to prevent the speaker from trying to play bass frequencies below its capabilities.
No sound output from the tweeter
Verify the wiring connections at the speaker terminals. If the tweeter remains silent, ensure your crossover setting is not filtering out the high-frequency range.
Speaker produces a rattling noise
Check that the metal mesh grill is tightened properly and that there are no loose wires or debris touching the speaker cone.
Pros and Cons
Pros
- Integrated bullet tweeter saves space and simplifies installation
- High power handling of 225W RMS
- Lightweight yet powerful neodymium motor structure
- Rugged construction with included protective metal grill
- Water-resistant components for increased durability
Cons
- Pro-audio sound signature can be aggressive for casual listeners
- Requires high-quality amplification to reach potential
- Mounting depth may require modifications in some vehicle door panels
Setup, Compatibility & Care
When installing the PRO-ZT6, ensure your amplifier is tuned correctly to match the 225W RMS rating to prevent clipping. Because these are 4-ohm speakers, they are compatible with most standard aftermarket head units and amplifiers. Always check your door depth before installation, as the motor structure is significant despite the lightweight neodymium design. For care, keep the speakers free of excessive dust buildup. While they are water-resistant, they are not fully submersible, so avoid direct high-pressure water spray if installed in external-facing locations. Periodically inspect the metal mesh grill to ensure it is securely fastened to prevent vibration rattles.