Plumbright Endfeed Stop End - 8mm
Best current price£0.31from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£0.31Visit shop Plumbright Endfeed Stop End 8Mm 30063202
Visit shopCity Plumbing GB£0.31Visit shop One Offer
1 offer from £0.31
View price history by clicking the chart icon.
Product Information
Full details
This guide is for anyone using Plumbright Endfeed Stop Ends - 8mm fittings in their plumbing projects. These fittings provide a reliable and cost-effective way to connect copper pipes in both hot and cold water systems, and even low-pressure home gas installations. Be aware that proper soldering technique is essential for a watertight seal.
All features
| Model Part Number | 78076 |
|---|---|
| Brand | Plumbright |
Extended Product Information
FAQs
What is the EN 1254-1 standard?
It's a European standard that specifies the requirements for copper and copper alloy capillary and compression fittings.
What does the Kitemark mean?
It indicates that the product has been independently tested and meets the necessary safety and quality standards.
Are these fittings suitable for gas?
Yes, they are suitable for low-pressure home gas installations.
What type of solder should I use?
Use solder specifically designed for plumbing applications.
Can I reuse these fittings?
No, it's recommended not to reuse end feed fittings after they have been soldered.
How do I know if the solder joint is good?
The solder should form a smooth, continuous ring around the entire joint.
Troubleshooting
Joint leaks after soldering.
Ensure the pipe was fully inserted into the fitting, clean the pipe and fitting before soldering, and ensure the solder has flowed completely around the joint. Re-solder if needed.
Difficulty in soldering.
Make sure you use the correct amount of heat, and flux is applied. Practice soldering on scrap pieces of pipe before working on your installation.
Pros and Cons
Pros
- Cost-effective solution for joining copper pipes.
- Suitable for a wide range of plumbing applications.
- Certified to meet industry standards for safety.
- Easy to install with proper soldering techniques.
Cons
- Requires soldering, which needs some skill and experience.
- Soldering can be messy if not done correctly.
- May require additional fittings for specific applications.
Setup, Compatibility & Care
- Preparation: Clean the copper pipe and fitting with a wire brush or emery cloth. Ensure both surfaces are free of debris and oxidation.
- Assembly: Insert the copper pipe fully into the fitting.
- Soldering: Apply flux to the pipe and fitting. Heat the fitting with a blowtorch and apply solder to the joint until it flows evenly around the connection. Allow to cool.
- Compatibility: These fittings are compatible with 8mm copper pipes.
- Care: Once installed, these fittings require no special care. However, regularly inspect for leaks.