SmellyGel Rust Remover - Purple
Best current price£33.94from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£33.94Visit shop B&Q - Unknown Rust Remover1L. Tackles Rust On Outdoor Hard Surfaces. FastSafe And Effective
Visit shopB&Q£33.94Visit shop One Offer
1 offer from £33.94
View price history by clicking the chart icon.
B&QB&Q - Unknown Rust Remover1L. Tackles Rust On Outdoor Hard Surfaces. FastSafe And Effective
Free delivery in 1–3 days
£33.94
Visit shop
Product Information
Full details
The SmellyGel Rust Remover in Purple is designed for homeowners and DIY enthusiasts struggling with stubborn rust or tannin stains on outdoor hard surfaces. Its key benefit is fast, effective, and safe stain removal without damaging materials like patios, paving, natural stone, brickwork, and concrete. A potential caveat is its specific formulation for vertical or sloped surfaces, meaning its adherence may differ on perfectly horizontal areas. This powerful gel formula targets rust from garden furniture, gates, tools, and metal run-off, as well as tannin stains from timber and leaves, ensuring a clean finish.
All features
| Colour | Purple |
|---|---|
| Model Part Number | SURFRUST.1 |
| Brand | SmellyGel |
Extended Product Information
FAQs
What types of stains can SmellyGel remove?
SmellyGel is specifically designed to remove rust stains and tannin stains. This includes stains from metal furniture, tools, gates, iron-rich water run-off, as well as stains caused by timber, leaves, and other organic materials.
Can I use SmellyGel on indoor surfaces?
No, SmellyGel is formulated for outdoor hard surfaces and should not be used indoors. Ensure good ventilation when using it outdoors.
How much area can one litre of SmellyGel cover?
One litre of SmellyGel typically covers between 6 to 8 square meters, depending on the severity of the stains and the porosity of the surface.
Is SmellyGel safe for all types of stone?
SmellyGel is generally safe for most common outdoor hard surfaces, including patios, paving, brickwork, and concrete. However, it's always recommended to test on a small, inconspicuous area first, especially with natural stones or treated/painted surfaces, to ensure compatibility.
How long should I leave the gel on the stain?
The recommended dwell time is usually between 10 to 20 minutes. Do not allow the gel to dry out on the surface. Refer to the product packaging for precise instructions as time may vary based on stain severity.
What should I do if I get SmellyGel on my skin?
If SmellyGel comes into contact with skin, wash the affected area immediately and thoroughly with soap and water. If irritation persists, seek medical advice.
Can I use SmellyGel on wooden surfaces?
SmellyGel is designed for hard surfaces. While it can remove tannin stains that originate from wood onto hard surfaces, it is not intended for direct application to wood itself.
Troubleshooting
Stains not completely removed after one application.
For deep-set or old stains, a second application may be necessary. Ensure the gel is applied thickly enough and allowed to dwell for the appropriate time without drying out.
Product appears to be running off a slightly sloped surface.
Ensure the surface is not excessively sloped. Apply the gel in smaller sections and avoid over-application. Allowing a slight tackiness before full dwell time can help adherence.
Unusual discoloration on the treated surface.
This may indicate incompatibility with the specific material. Always perform a patch test on an inconspicuous area before widespread application. If discoloration occurs, rinse immediately and thoroughly with water.
Product is difficult to rinse off.
Ensure thorough rinsing with plenty of clean water. If residue remains, use a hose with good pressure or a sponge to help remove it.
Pros and Cons
Pros
- Effectively removes tough rust and tannin stains.
- Safe for use on various outdoor hard surfaces.
- Gel formula stays put on vertical and sloped areas.
- Handles multiple types of organic and inorganic stains.
- Good coverage rate for its purpose.
Cons
- May be less effective on completely horizontal surfaces where gravity aids runoff.
- Requires proper ventilation during use.
- Test on an inconspicuous area first to ensure compatibility with specific surface types.
- Not suitable for indoor use.
- May require multiple applications for very old or deep-set stains.
Setup, Compatibility & Care Instructions
Setup and Application:
- Preparation: Ensure the surface to be treated is dry and free from loose debris.
- Protection: Wear appropriate personal protective equipment, including gloves and eye protection. Ensure good ventilation.
- Application: Apply the gel directly to the stained area using a brush or applicator. For vertical surfaces, start from the bottom and work upwards, or apply evenly to ensure adherence.
- Dwell Time: Allow the gel to penetrate the stain for the recommended time (refer to product packaging for specifics), typically 10-20 minutes, but do not let it dry out.
- Rinsing: Thoroughly rinse the treated area with clean water. A soft brush can be used to help lift stubborn stains during rinsing.
- Repeat if Necessary: For very stubborn or old stains, a second application may be required.
Compatibility:
SmellyGel is suitable for use on patios, paving, natural stone, brickwork, concrete, and various outdoor hard surfaces. It is also effective on metal garden furniture, gates, and tools. Always test on a small, inconspicuous area first to confirm compatibility with your specific surface material, especially on sensitive natural stones or painted surfaces.
Care:
Store the product in a cool, dry place, away from direct sunlight and out of reach of children and pets. Ensure the cap is securely fastened after use. Clean application tools with water immediately after use.