d-c-fix Concrete White Sticky Back Plastic Vinyl Wrap Film - 67.5cm x 5m
High Quality d-c-fix is our preferred brand of vinyl film due to its 5* rating for adhesion, opaci...High Quality d-c-fix is our preferred brand of vinyl film due to its 5* rating for adhesion, opacity, lightfastness, shrinkage and durability. Dc fix sticky back plastic designs are so authentic, you will hardly believe its a vinyl film. Rejuvenate a worktop or wrap kitchen doors in minutes, customise furniture like drawer fronts or wardrobe doors. This vinyl can save you thousands on buying new, simply cover what you have. Dc fix is a non-permanent DIY solution, perfect for tenants or landlords looking for a quick fix, the vinyl can be removed fairly easy, use a hairdryer to warm the vinyl first and peel back, any leftover residue can be removed using warm soapy water. Dc fix has a water based low tack adhesive, this allows the vinyl to be repositioned during application, unlike stronger solvent based adhesives. Simply pull the vinyl back and start again. This vinyl has a 5 star rating for adhesion, lightfastness, shrinkage and durability. The film is heat resistant to 75°C so OK for hot cups and plates but not hot pans. Always keep at least 12 inches away from naked flames and use a worktop saver for cutting, do not cut directly on the vinyl. Wipe clean with a regular household cleaner and wipe up spillages that may stain straight away (e.g. curry). Sticky back plastic is a non-permanent DIY solution for updating surfaces in the home, perfect for tenants and landlords looking for a quick, easy and budget-friendly way of updating kitchen doors or rejuvenating old worktops. It's also perfect for upcycling items of furniture. The film is fully removable - use a hairdryer to soften the adhesive first and warm soapy water to remove any remaining residue. Brand: d-c-fix Self adhesive We recommend using a dc fix smoother for best finish Use a sealant around sinks and hobs 4) spray a little water on smooth surfaces like glass & appliances Spray a little water on smooth surfaces like glass & appliances Hairdryer can be used on curved surfaces to make the vinyl more pliable Phthalate-free PVC with water based adhesive and FSC paper backing
This guide is for anyone looking to refresh their home decor or restore furniture with the d-c-fix Concrete White Sticky Back Plastic Vinyl Wrap Film. You'll achieve a modern, concrete aesthetic with ease. Keep in mind that surface preparation is key for optimal adhesion.
All features
Brand
d-c-fix
Extended Product Information
FAQs
How do I remove the film?
Gently heat the film with a hairdryer to soften the adhesive, then slowly peel it off. Use a plastic scraper if necessary.
Can I use this film on a textured surface?
It is not recommended for highly textured surfaces, as the adhesive may not bond effectively. Smooth surfaces are ideal.
What kind of cleaner should I use?
Use a damp cloth with mild soap. Avoid abrasive cleaners or strong chemicals.
Is the film waterproof?
The film is water-resistant, making it suitable for use in kitchens and bathrooms. However, prolonged exposure to water should be avoided.
Can I reposition the film after application?
It's best to apply it correctly the first time. Repositioning may reduce the adhesive's effectiveness. Try to be precise when applying.
What tools do I need to apply the film?
You'll need a measuring tape, scissors or a utility knife, a squeegee or a soft cloth, and a hairdryer (optional).
How long will the film last?
With proper application and care, the film can last for several years.
Troubleshooting
Air bubbles under the film.
Lift the film and reapply, smoothing out the bubbles with a squeegee. You can also prick the bubbles with a pin and flatten them.
Film not sticking properly.
Ensure the surface is clean and dry. Use a primer for extra adhesion on challenging surfaces.
Edges peeling up.
Trim the edges neatly and apply heat with a hairdryer to activate the adhesive. Press the edges firmly.
Pros and Cons
Pros
Easy to apply, saving time and effort.
Provides a cost-effective way to update and refresh surfaces.
Durable and long-lasting, withstanding everyday wear and tear.
Offers a modern concrete aesthetic.
Good opacity for effective coverage.
Cons
Requires careful surface preparation for best results.
May not be suitable for all surfaces (e.g., highly textured or porous).
Removal can be challenging on some surfaces.
Air bubbles can occur during application if not applied carefully.
Setup, Compatibility & Care
Surface Preparation: Clean the surface thoroughly. Ensure it's free of dust, grease, and other debris.
Cutting: Measure and cut the film to the desired size, leaving a small overlap for adjustments.
Application: Peel off a small section of the backing and align the film. Apply the film to the surface, smoothing out any air bubbles with a squeegee or a soft cloth. Work slowly to prevent wrinkles.
Compatibility: This film is compatible with most smooth, non-porous surfaces such as wood, plastic, and metal. Test in an inconspicuous area if unsure.
Care: Wipe the surface with a damp cloth and mild soap for cleaning. Avoid using abrasive cleaners or scrubbing.