Best current price£3.95from eBay
Shopping.co.uk recommended and popular offers
eBay£3.95Visit shop Airbrush Compressor Hose Adaptor: 1/4 BSP Female to 1/8 BSP Male
Visit shop1 offer from £3.95
View price history by clicking the chart icon.
This guide provides essential information for users of the Airbrush Compressor Hose Adaptor, specifically designed to connect 1/4" BSP male compressor outlets to 1/8" BSP female airbrush hoses. The primary benefit is achieving a secure and leak-free connection, critical for optimal airbrush performance. However, users should note that proper sealing with PTFE tape or thread locking glue is essential for preventing leaks.
| Brand | Generic |
|---|
BSP stands for British Standard Pipe, a standard for the size of threads on pipes and fittings. In this case, it refers to the size of the threads on your compressor outlet and airbrush hose.
Use PTFE tape or thread locking glue to create a leak-free seal at the connections.
Wrap the PTFE tape around the male threads in the direction of the threading, ensuring that the tape doesn't unravel as you screw the adaptor together.
This adaptor is designed for airbrushes that have a 1/8" BSP female hose connection. Always verify compatibility.
Tighten the connection until it's snug, then perform a leak test by turning on the compressor. If you hear air escaping, tighten it further, or reapply sealant.
This information is not provided in the product data.
The 1/8" BSP measures approximately 9mm diameter and the 1/4" BSP measures approximately 12mm diameter. The overall size of the adaptor will vary.
Tighten the connections. If the leak persists, remove the adaptor, reapply PTFE tape or thread locking glue, and reassemble.
Ensure that the threads are clean and free of debris. Verify that you are using the correct BSP thread sizes (1/4" BSP and 1/8" BSP). If there's still a problem, check that the threads are not damaged.
