Best current price£6.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£6.99Visit shop B&Q - Plain Light Glossy Grey Self Adhesive Vinyl Sticky Back Wrap Film 1M X 45Cm
Visit shop5 offers from £6.99 - £41.99
View price history by clicking the chart icon.
This D-C-Fix Self Adhesive Vinyl Wrap in Light Glossy Grey is ideal for DIY enthusiasts and renters looking to quickly and affordably update surfaces like kitchen counters and furniture. Its key benefit is providing a fresh, stylish look with easy application. A caveat to keep in mind is its heat resistance limit of 70ºC, making it unsuitable for direct contact with hot pans.
| Model Part Number | 200-1987-15 |
|---|---|
| Brand | d-c-fix |
Each quantity ordered is 1 meter in length and 45cm in width. You can order multiple meters to receive a single, continuous piece up to 15 meters long without joints.
It is best applied to a smooth, clean surface. Applying over textured wallpaper may result in an uneven finish and potential adhesion issues.
Gently warm the vinyl with a hairdryer on a low setting, which will soften the adhesive. Then, slowly peel it away from the surface.
Yes, it is safe for general kitchen use and is wipeable. However, it is not suitable for surfaces that will be in direct contact with hot pans or extremely high heat sources (above 70ºC).
The surface must be clean, dry, and smooth. Any grease, dirt, or texture will affect adhesion and the final appearance.
The product comes with a 1-year guarantee.
This D-C-Fix vinyl film is made in Germany.
Gently lift the vinyl back to the bubble and reapply, using a felt smoother to push out air. For small bubbles, you can carefully prick with a fine needle and smooth down.
Ensure the surface is clean, dry, and smooth. Reheat the vinyl slightly with a hairdryer and press firmly. Check if the surface is too porous or uneven.
Use a sharp utility knife or craft knife. A cutting mat can help ensure a clean edge.
Gently warm the vinyl with a hairdryer on a low setting while stretching and applying it around the curve. Hold in place until it cools and sets.
Setup: Ensure the surface is clean, dry, and smooth. Measure and cut the vinyl using the grid on the reverse. Peel back a small section of the backing paper and align the vinyl. Slowly peel away the backing while applying the vinyl, using a felt smoother to press it down and remove air bubbles. A hairdryer can be used to gently warm curved edges for a better fit.
Compatibility: This vinyl adheres to any smooth, non-porous surface. This includes painted walls (ensure paint is well-adhered), laminate, wood, metal, and glass.
Care: Wipe clean with a damp cloth and mild detergent. Avoid abrasive cleaners. Wipe up spills immediately to prevent staining. The vinyl is heat resistant up to 70ºC; do not place hot items directly onto the surface.
