Defender Wide Plastic Bird and Pigeon Spikes - 5 Metre
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Defender Wide Plastic Bird and Pigeon Spikes are designed for homeowners and property managers seeking a humane, effective method to prevent pigeons and other nuisance birds from landing on ledges, fences, and rooftops. These spikes provide a durable, weather-resistant barrier that discourages nesting and roosting without causing harm to wildlife, though they require precise surface preparation and proper adhesive application to ensure long-term effectiveness in high-wind environments.
All features
| Model Part Number | EPW-005 |
|---|---|
| Brand | B&Q |
Extended Product Information
FAQs
Will these spikes harm the birds?
No, the spikes are blunt-tipped and designed specifically to be humane, acting as a physical deterrent rather than a trap or injurious device.
Can these be installed on plastic or PVC guttering?
Yes, but ensure you use a plastic-compatible adhesive and clean the surface thoroughly to prevent the spikes from peeling off.
Do I need to drill holes to install these?
While the base has holes that could be used for screws, standard practice is to use a high-strength silicone adhesive for a clean, damage-free installation.
How long will the plastic last outdoors?
The spikes are made from UV-stabilized plastic, designed to last for many years even when exposed to direct, harsh sunlight.
What is the best way to clean the area before installation?
Use a stiff brush to remove debris, and then use a degreaser or methylated spirits to ensure the surface is completely clean and dry before applying adhesive.
Troubleshooting
Spikes coming loose from the surface
Ensure the surface was free of loose paint, dust, or grease before installation; re-bond using a high-quality neutral-cure silicone.
Birds still landing behind the spikes
Ensure the spikes are installed right to the edge of the ledge to leave no landing space for the birds.
Pros and Cons
Pros
- Provides a completely humane bird control solution
- UV-stabilized materials prevent degradation in direct sunlight
- Modular strip design allows for easy customization of length
- Virtually invisible from ground level once installed
Cons
- Requires professional-grade adhesive for secure mounting
- Not suitable for very small birds like starlings in some configurations
- Surface must be thoroughly cleaned and dry before application
- Cannot be used on surfaces with extreme curves without modification
Setup, Compatibility & Care
To install, start by measuring the linear length of your surface. Snap the strips to fit smaller gaps if necessary. Apply a high-strength neutral-cure silicone adhesive to the base of the spike strip. Press firmly onto the cleaned surface to ensure the adhesive penetrates the holes in the base for a mechanical bond.
These spikes are compatible with stone, metal, brick, and wooden surfaces. Care is minimal; once installed, they are virtually maintenance-free. It is recommended to inspect the strips annually to ensure the adhesive bond remains strong and that no debris has accumulated underneath that could cause lifting.