STORMGUARD Draught Excluder - White - 5m

This Stormguard V Seal tape is ideal for blocking out drafts around your home, suitable for front ...

Best current price£6.29from OnBuy.com

All Offers

2 offers from £6.29 - £9.58

View price history by clicking the chart icon.

OnBuy.comStormguard 05Sr180005mw 5M Self-Adhesive V-Shaped Seal Tape Draught Excluder, White - Door & Window Gap Sealing 5017259311844
Free delivery in 1–3 days
£6.29
Visit shop
eBayStormguard 05SR180005MW 5m Self-Adeshive ' V L-5 Metres W-10mm H-10mm, White
Free delivery in 1–3 days
£9.58
Visit shop

Product Information

Full details

This guide is for homeowners seeking to improve their home's energy efficiency by sealing drafts around doors and windows. The STORMGUARD Draught Excluder offers a simple, self-adhesive solution to block drafts and reduce energy costs. However, it's essential to ensure proper surface preparation for optimal adhesion and long-term performance.

All features

Model Part Number844
BrandSTORMGUARD

Extended Product Information

FAQs

How long does the STORMGUARD Draught Excluder last?

The product comes with a 4-year guarantee, but the lifespan can vary depending on usage and environmental conditions.

Can I paint over the tape?

It is not recommended to paint over the tape, as it may affect its adhesive properties and effectiveness.

Is the tape waterproof?

The tape is water-resistant, protecting against light moisture but not designed for complete water sealing.

What gap sizes can this tape seal?

The tape effectively seals gaps between 1mm and 8mm wide.

What material are the tape made of?

The material is not specified.

Can I use this on a sliding door?

Yes, it can be used on sliding doors, provided the gap is within the specified range.

How do I remove the tape if needed?

Carefully peel the tape off. Some adhesive residue may remain; this can be removed with a suitable adhesive remover.

Troubleshooting

The tape is not sticking properly.

Ensure the surface is clean, dry, and free of any residue before application. Press firmly on the tape after applying to ensure a good bond. If the surface is porous, consider using a primer.

The door or window is difficult to close after installing the tape.

Check that the tape is not too thick for the gap. You might need to adjust the placement of the tape or use a thinner profile.

The tape is coming off after a short period.

Make sure the surface is completely dry before application. Consider using a heat gun or hair dryer on low setting to activate the adhesive. Also, check for any oily substances on the surface before applying the tape.

Pros and Cons

Pros

  • Easy to install with no special tools needed.
  • Improves energy efficiency by reducing drafts.
  • Cost-effective solution for home insulation.
  • Wipe-clean surface for easy maintenance.
  • Suitable for various door and window types.

Cons

  • Adhesion may be affected by certain surface types or conditions.
  • Requires accurate measurement and cutting for a proper fit.
  • May need replacement after several years depending on wear.
  • Not effective for gaps wider than 8mm.

Setup, Compatibility & Care

  1. Preparation: Clean the surface where the tape will be applied to remove dirt, dust, and any existing sealant.
  2. Measurement: Measure the length of the area you intend to seal (e.g., door frame).
  3. Cutting: Cut the STORMGUARD Draught Excluder to the required length using scissors or a utility knife.
  4. Application: Peel off the backing and carefully apply the self-adhesive tape to the rebate of the door or window frame, ensuring it's properly aligned.
  5. Press Firmly: Press the tape firmly against the surface to ensure a secure bond.

Compatibility: This product is compatible with most door and window frames made from wood, metal, or uPVC.

Care: The tape is wipe clean. For stubborn marks, use a mild detergent with a damp cloth. Avoid abrasive cleaners or solvents.

Price History

DatePrice
Visit shop