Best current price£115.89from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£115.89Visit shop Seal-Once Nano+Poly Penetrating Wood Sealer With Polyurethane - Premium Waterproof Sealant -1 Gallon & Clear 854734005042
Visit shop1 offer from £115.89
View price history by clicking the chart icon.
Seal-Once Nano+Poly is designed for homeowners and contractors looking for a durable, protective solution for outdoor wood surfaces like decks, fences, and log homes. Its core benefit is a deep-penetrating water-based formula that creates a water-resistant shield from within the fibers rather than just sitting on the surface, though users should note that the finish allows wood to grey naturally over time rather than maintaining an artificial stain color.
| Model Part Number | SOP 500G |
|---|---|
| Brand | Seal-Once |
Yes, the formula is low-VOC and non-toxic, making it safe for use around pets, people, and plants once dry.
The sealer is designed to be clear and allows the wood to age naturally, meaning it will eventually grey due to UV exposure.
No, Seal-Once Nano+Poly must penetrate into raw wood fibers. Existing stains or sealers must be removed first.
Cleanup is very simple; just use standard soap and warm water for all tools and brushes.
Yes, but ensure the pressure-treated wood has had sufficient time to dry out completely before application to ensure proper penetration.
Reapplication depends on the level of weather exposure; inspect the surface yearly and reapply when water no longer beads on the wood.
Ensure the wood surface was not overly saturated during application and that the ambient humidity is within reasonable limits.
This may indicate the wood was already sealed or is not porous enough; clean the surface thoroughly and test a small area for absorption.
Flush the sprayer system with warm, soapy water after every use to prevent the polyurethane particles from hardening inside the equipment.
Before applying, ensure the wood surface is free from dirt, oil, and existing paint or varnish, as these will block absorption. You can apply the sealer using a brush, roller, or a low-pressure sprayer. For best results, avoid application in direct, hot sunlight to prevent the product from drying too quickly before it has fully penetrated. Cleanup is straightforward; simply wash brushes, rollers, and sprayers with soap and warm water immediately after use. Regular maintenance is minimal, though it is recommended to inspect the surface annually for water-repellency and reapply if necessary to maintain full protective coverage.
