Nes Home Glass Shower Door Seal Strip - 900 mm - 6mm Glass

This Nes Home shower door seal strip is specifically designed to fit glass that is 6 mm thick.

The seal strip is designed to effectively seal gaps between your shower door and the base or tray up to 26 mm.

No, installation is tool-free. You simply push the strip onto the edge of the glass door.

It is designed for frameless shower doors with 6 mm thick glass. It may not fit framed doors or doors with different glass thicknesses.

The seal strip measures 900 mm in length, suitable for most standard shower door widths. It can be trimmed if necessary.

The seal strip is made from an environmental friendly, durable quality material that is designed not to turn yellow over time.

Clean the seal strip with a damp cloth and mild soap. Avoid abrasive cleaners.

Ensure the glass edge is clean and dry. Slightly moistening the glass edge with water may help. Verify that the glass is indeed 6mm thick, as the strip is precisely designed for this measurement.

Check that the strip is fully seated on the glass and that it is making proper contact with the shower tray or floor. Ensure the gap being sealed is within the 26mm limit. Inspect the strip for any damage or wear.

Re-attach the strip, ensuring it is firmly pushed onto the glass. If the glass edge is worn or chipped, this might affect adhesion. Ensure the correct glass thickness (6mm) is being used.

Use a sharp blade for trimming and smooth any rough edges with fine-grit sandpaper or a craft knife for a cleaner finish.