Best current price£82.10from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£82.10Visit shop Trend Traditional Torus Cutter Pk 1 C260x1/2Tc
Visit shop6 offers from £82.10 - £97.95
View price history by clicking the chart icon.
The Trend CraftPro Traditional Torus Router Cutter (C260X1/2TC) is an ideal choice for woodworkers and furniture makers who require precision corner mouldings and decorative beads in their projects. Engineered for durability, it excels on softwood, hardwood, and man-made boards alike; however, users should ensure they are using a router capable of handling a 1/2-inch shank to fully utilize its cutting potential.
| Model Part Number | C260X1/2TC |
|---|---|
| Brand | Trend |
No, this specific model features a 1/2-inch shank and is not compatible with 1/4-inch router collets.
No, the PTFE coating is designed for dry use. Applying oil may actually attract dust and decrease the cutter's lifespan.
You will notice increased resistance when feeding wood through the cutter, or an increase in minor tear-out on the edges.
Yes, it is designed for man-made timber boards including MDF and plywood, though these materials are more abrasive to the carbide.
You should insert the shank until it reaches the Safety K-Mark line, ensuring that at least 3/4 of the shank is secured within the collet.
Reduce your feed rate and ensure you are taking multiple light passes instead of one full-depth cut.
Check that the collet is tightened securely and ensure the bit is not bottomed out in the router housing.
Clean the cutter with a dedicated resin remover and a soft nylon brush to restore the efficacy of the PTFE coating.
To ensure optimal performance and safety, always insert the cutter shank into the router collet up to the K-Mark line, leaving at least 3/4 of the shank inside the tool. Before starting, ensure your router collet is clean and free of debris to prevent vibration.
For maintenance, wipe the cutter with a resin-removing solvent after each use to clear any build-up from the non-stick coating. Store the bit in its original packaging or a protective rack to prevent the carbide edges from chipping against other metal tools.
