Cartec Diamond Cut 3000 Compound - 1KG
Best current price£49.90from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£49.90Visit shop Cartec Diamond Cut 3000 1KG Extreme Cutting Compound Polish
Visit shopeBay£49.90Visit shop All Offers
2 offers from £49.90 - £55.12
View price history by clicking the chart icon.
eBayCartec Diamond Cut 3000 1KG Extreme Cutting Compound Polish
Free delivery in 1–3 days
£49.90
Visit shop
OnBuy.comCartec Diamond Cut 3000 1Kg Extreme Cutting Compound Polish 5060859874035
Free delivery in 1–3 days
£55.12
Visit shop
Product Information
Full details
The Cartec Diamond Cut 3000 Compound is designed for professional detailers and automotive enthusiasts who need to eliminate deep paint defects quickly. It offers the key benefit of extreme cutting power combined with a clean, low-dust working experience, making the paint correction process significantly more efficient. The primary caveat is that its aggressive abrasive nature requires careful handling on thinner clear coats or delicate paint systems to avoid over-correction.
All features
| Model Part Number | Extreme Cut Diamond 3000 Compound Car Paste 1KG |
|---|---|
| Brand | Cartec |
Extended Product Information
FAQs
Can this be used by hand?
While it is designed primarily for machine polishing, it can be used for spot corrections by hand, though it will not provide the same level of cut or uniformity as a machine.
Do I need to polish after using Diamond Cut 3000?
For best results, it is recommended to follow up with a finishing polish to remove any light hazing and maximize paint depth and clarity.
Is it safe for all paint types?
It is safe for most automotive clear coats, but always perform a test spot in an inconspicuous area, especially on older or single-stage paint systems.
How do I clean the residue off the paint?
Use a clean, high-quality microfiber towel. If the residue is stubborn, a light spritz of an isopropyl alcohol-based panel wipe can assist in removal.
What type of pad works best?
Wool pads provide the most aggressive cut, while firm, open-cell foam pads are excellent for a balance of cut and finish.
Troubleshooting
Compound is dusting excessively
Reduce the amount of product used per section or lower the polisher's speed; excessive dusting is often a sign of using too much product.
Holograms or buffer trails remain
Follow up with a finer finishing polish and a soft foam pad to refine the surface after the heavy cutting stage.
Compound drying out too quickly
Work in smaller sections or add a light mist of water to the pad to extend the working time of the abrasives.
Pros and Cons
Pros
- Rapidly removes deep scratches and sanding marks
- Minimal dusting during high-speed polishing
- Highly efficient for professional paint correction
- Leaves a clear, high-gloss finish after correction
Cons
- Requires professional experience for optimal results
- May be too aggressive for soft or thin clear coats
- Requires a secondary finishing polish for a perfect show-car shine
Setup, Compatibility & Care
To ensure the best results, always work on a clean, cool, and dry surface, preferably out of direct sunlight. The product is compatible with most rotary and dual-action polishers.
- Preparation: Thoroughly wash and decontaminate the vehicle surface using a clay bar to remove embedded surface debris.
- Application: Apply 3-4 pea-sized drops of compound to your chosen cutting pad.
- Polishing: Spread the product at a low speed, then increase to the manufacturer's recommended RPM for your polisher.
- Storage: Keep the 1KG container sealed in a cool, dry place to prevent the paste from drying out or separating. Do not allow the product to freeze.