Best current price£9.74from eBay
Shopping.co.uk recommended and popular offers
eBay£9.74Visit shop 3m High End DMX Lighting Spiral Shielded 3 Pin Male to Female LED/Light Cable
Visit shop
B&Q£10.99Visit shop B&Q - Pulse Dmx Spiral Shielded Insulated 3 Pin Male To Female Cable 3M
Visit shop2 offers from £9.74 - £10.99
View price history by clicking the chart icon.
This 3-meter Kenable DMX lighting cable is designed for professional and hobbyist lighting control applications, offering reliable data transmission for modern DMX-compatible fixtures. Its robust construction ensures durability for stage, event, or studio use, though it specifically uses a 3-pin XLR connector, limiting compatibility with older 5-pin DMX systems. Key features include a 3-pin XLR male to female connection, spiral shielding for signal integrity, and a 3-meter length.
| Colour | Black |
|---|---|
| Model Part Number | 004555 |
| Brand | Kenable |
DMX (Digital Multiplex) is a standard communication protocol used to control stage lighting and effects. This cable transmits DMX data signals between your lighting controller and your fixtures, allowing for precise command over color, intensity, movement, and other parameters.
No, this cable is specifically designed for DMX data transmission and is not suitable for carrying audio signals. While it uses an XLR connector, the internal wiring and intended use are for digital lighting control.
It means the cable contains three internal conductors, which are used for the two data lines (Data+ and Data-) and a common ground/shield. This is standard for 3-pin DMX applications.
This cable connects two devices (e.g., controller to light, or light to light). To connect multiple lights in a chain, you will typically daisy-chain them using multiple DMX cables, with this cable being used for one link in that chain. Always check the total number of fixtures supported by your DMX controller.
The primary difference is the connector type. 3-pin XLR is common in newer LED lighting, while 5-pin XLR was more common in older professional lighting equipment. While both carry the DMX protocol, they are not directly interchangeable without adapters. This cable uses the 3-pin standard.
For longer runs or chains with many fixtures, ensure you use high-quality, shielded DMX cables like this one. It is also crucial to terminate the last fixture in the DMX chain with a DMX terminator (usually a 120-ohm resistor) to prevent signal reflections.
Verify that the cable is securely plugged into both the controller/previous fixture and the lighting fixture. Ensure the DMX addresses are correctly set on all fixtures and that the cable is part of a properly terminated DMX chain (typically, only the last fixture in the chain needs a terminator).
Check the cable for any visible damage to the jacket or connectors. Ensure the cable is not running parallel to high-power electrical cables, which could cause interference. Try a different DMX cable to rule out a cable fault.
Inspect the connectors for dirt or debris and clean them carefully. Ensure you are using the correct 3-pin XLR connector and not attempting to force it into a different type of port.
Setup: Simply plug the male 3-pin XLR connector into the DMX output port of your lighting controller or the previous fixture in your DMX chain. Connect the female 3-pin XLR connector to the DMX input port of your lighting fixture or the next device in the chain. Ensure connections are firm and secure.
Compatibility: This cable is designed for 3-pin DMX systems. It is compatible with modern LED lighting fixtures, stage lighting, and controllers that utilize 3-pin XLR for DMX data. It is *not* directly compatible with older 5-pin DMX systems. If you need to connect to a 5-pin system, you will require a 3-pin to 5-pin DMX adapter.
Care: Store the cable in a cool, dry place away from direct sunlight when not in use. Avoid sharp bends or kinks, especially near the connectors, to prevent internal wire damage. Periodically inspect the connectors and cable jacket for any signs of wear or damage. Clean the cable with a dry or slightly damp cloth; do not use harsh chemicals.
