Setup, Compatibility & Care
Setup:
- Prime the Marker: Before first use, hold the marker vertically. Press the tip firmly onto a scrap surface (like paper) several times until the ink flows consistently. You may need to shake the marker gently first.
- Test Surface: Always test the marker on an inconspicuous area of the surface you intend to write on to ensure compatibility and erasability.
Compatibility:
These markers are designed for *non-porous* surfaces, including:
- Glass
- Whiteboards
- Sealed Chalkboards (ensure the surface is not porous)
- Plastic
- Vinyl
- Metal
- Glossy painted surfaces (test first)
*Avoid* using on paper, fabric, unfinished wood, or other porous materials, as the ink may be permanent.
Care:
- Storage: Store markers horizontally or tip-up to prevent ink from drying out in the tip. Cap tightly after each use.
- Cleaning: To erase, use a clean, damp cloth. For stubborn marks, a solution of water and a drop of dish soap can be used, followed by a rinse with a clean damp cloth. Ensure the surface is completely dry before re-writing.
- Ink Flow: If the ink flow becomes weak, repeat the priming step (shake gently and press tip). Ensure the cap has been sealed properly.