Zipper Balcony Greenhouse

We recommend using a high-quality potting mix specifically formulated for containers or raised beds. This type of soil provides good drainage and aeration, which is essential for healthy plant growth in an enclosed environment like the greenhouse.

While you can grow smaller, bushier varieties of tomatoes or other vegetables, the greenhouse's height is best suited for compact plants, herbs, and leafy greens. Taller plants may outgrow the available vertical space.

Yes, the Zipper Balcony Greenhouse is constructed with a weather-resistant aluminium frame and galvanised steel sheets, along with durable polycarbonate panels, designed to withstand typical outdoor weather conditions. However, in extreme weather events like heavy snow or high winds, it's advisable to take additional precautions or secure it further.

Clean the polycarbonate panels using a soft cloth or sponge with mild soap and lukewarm water. Rinse thoroughly with clean water. Avoid using abrasive cleaners, stiff brushes, or solvents as these can scratch or damage the panels.

Moving the greenhouse once it's filled with soil and plants is not recommended due to its weight and potential for structural strain. It's best to assemble and fill it in its final desired location. If relocation is necessary, empty the planting trays first.

Each planting tray requires approximately 120 liters (around 4.2 cubic feet) of garden soil for optimal filling. With two trays, you will need a total of about 240 liters of soil.

Check the drainage holes at the bottom of the planting trays. Clear any soil, debris, or roots that may be blocking them. Ensure the greenhouse is on a level surface to allow proper water flow.

Utilize the two folding opening windows to improve ventilation. Open them on warm days to allow hot air to escape and fresh air to circulate. Consider adding a small battery-operated fan for enhanced air movement on extremely hot days.

Clean the tracks of the sliding door to remove any dirt or debris. A small amount of silicone lubricant (non-petroleum based) can be applied to the tracks to improve smoothness. Ensure the frame is level and not twisted, which could cause binding.

Clean the panels thoroughly with a mild soap and water solution and a soft cloth or sponge. Rinse well. Over time, algae or mineral deposits from rain can build up. Avoid harsh chemicals or abrasive materials which can damage the polycarbonate.