Best current price£11.75from The Range
Shopping.co.uk recommended and popular offers
The Range£11.75Visit shop Primaflow Hq Pf Large Bore Ftc Jg15x1/2"X300 - W-Tap15j - Wras Approved - Silver
Visit shop4 offers from £11.75 - £13.01
View price history by clicking the chart icon.
The Primaflow Large Bore Flexible Tap Connector is designed for plumbers and DIY enthusiasts needing a reliable and high-flow connection for hot and cold water systems. Its key benefit is the quick, WRAS-approved push-fit installation combined with a large bore for optimal water flow. A potential caveat to consider is the specific 15mm x 1/2" fitting size, which must match your existing plumbing. This 300mm long connector offers durable brass construction for longevity and flexible positioning, ensuring a secure and efficient connection for kitchen tap installations.
| Model Part Number | W-TAP15J |
|---|---|
| Brand | Primaflow |
WRAS (Water Regulations Advisory Scheme) approval means the product has been tested and complies with strict water efficiency and safety standards in the UK, ensuring it won't contaminate drinking water.
No, this connector is specifically designed for hot and cold water systems only. It is not safe or approved for gas connections.
While WRAS approval indicates suitability for standard domestic systems, always refer to the manufacturer's specifications for precise temperature and pressure limits. Generally, it is designed for normal hot and cold water mains pressure and temperature ranges.
To disconnect, you typically need a specific push-fit disconnection tool or you can push the collar on the fitting inwards while pulling the pipe out. Refer to specific instructions for the disconnection method.
The connector has a flexible length, but sharp bends should be avoided as they can restrict water flow and potentially damage the hose over time. Maintain gentle curves.
For the push-fit end, no special tools are usually required beyond ensuring a clean pipe end. For the threaded end, an adjustable spanner or wrench may be needed.
Warranty information is typically detailed by the retailer or manufacturer. Please check the product packaging or the retailer's website for specific warranty terms.
Ensure the pipe is cut squarely, clean, and fully inserted into the fitting. Check for any debris or damage on the pipe end. Re-seat the connector firmly.
Check the thread seal. If a rubber washer is present, ensure it is seated correctly. Hand-tighten, then use a spanner for a slight additional turn, but do not overtighten, which can damage the seal or threads.
Verify that both ends of the connector are fully inserted. Ensure there are no kinks in the flexible hose. Check the tap and the water supply itself for blockages.
Ensure the pipe end is clean, smooth, and free of any burrs or imperfections. Lightly chamfer the edge of the pipe if necessary. Do not force the connection.
Setup:
Compatibility:
Care:
