Sonik Angl-R Barbel Fishing Rod - 12' (3.66M) - 1.75LB

The Sonik Angl-R barbel rod is specifically designed for barbel fishing on rivers, particularly in the UK and Europe, where powerful fish and strong currents are common. It is also suitable for other coarse fishing requiring a robust rod with good control.

While the rod is very strong, it is not specifically designed for saltwater environments. Prolonged exposure to saltwater can corrode components. If used in saltwater, thorough rinsing with fresh water after each session is essential.

The luminous coating on the Avon tip glows in the dark, making it easier to detect subtle bites during low-light conditions or night fishing sessions.

The rod comes with two clip-on isotope holders that accommodate either 2.2mm or 3mm isotopes, allowing you to add a night light to your rod tip.

Wipe the cork handle with a slightly damp cloth to clean it. Avoid harsh chemicals. Over time, cork can be sealed with specific cork sealants if desired, but regular wiping is usually sufficient.

The '1.75LB' refers to the rod's test curve, a measure of its power and stiffness. A 1.75lb test curve indicates a powerful rod suitable for casting heavier weights and controlling strong fighting fish like barbel.

While a capable rod, its power and design are geared towards experienced anglers targeting specific species like barbel. Beginners might find a lighter, more general-purpose rod easier to learn with initially.

Ensure ferrules are clean and free from dirt or debris. Apply a small amount of silicone grease or beeswax to the male ferrule.

Check your leader knot and ensure it is neat and small. Make sure the line is properly threaded through all guides before casting. Ensure the anti-frap guide itself is clean and undamaged.

The luminous coating requires 'charging' under light. Expose the tip to bright light (natural sunlight is best) for a period to enhance its glow. Ensure the coating is clean; dirt can reduce its effectiveness.

Check that the reel foot is correctly seated in the reel seat. Tighten the screw-down mechanism firmly, ensuring it grips the reel foot securely. Do not overtighten.