Best current price£32.42from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£32.42Visit shop Hep2o Flexible Tap Connector 15 X 15 X 500Mm X Braided 2 Pack Hd225h/15W
Visit shop
B&Q£42.14Visit shop B&Q - Flexible Tap Connector 15 X 15 X 500mm X Braided 2 Pack Hd225H/15W
Visit shop2 offers from £32.42 - £42.14
View price history by clicking the chart icon.
The Hep2O Flexible Tap Connector is an ideal solution for plumbers and DIY enthusiasts looking to simplify sink or basin installations, offering a reliable push-fit connection that saves significant time on site. Engineered for both hot and cold water systems, these connectors integrate seamlessly with plastic or copper piping, though they require careful attention to pipe insertion depth to maintain their structural integrity.
| Model Part Number | HD225H/15W |
|---|---|
| Brand | Hep2O |
These connectors are primarily designed for hot and cold domestic water supply to taps and basins.
Hep2O is designed for copper and plastic pipe systems; use with stainless steel is not recommended.
Each connector in this pack is 500mm long.
No, the push-fit design is tool-free, though a standard pipe cutter is recommended for a clean, square cut.
The guarantee applies when the product is installed in accordance with the manufacturer's installation guidelines.
Remove the pipe, check that the end is cut square and free of burrs or scratches, then re-insert firmly until the tactile lock is engaged.
Ensure the pipe is not bent or distorted and that no debris is inside the connector. Lubricate the pipe end slightly with water if necessary.
Verify that you are using a standard 15mm outer diameter pipe and that it has been inserted past the initial O-ring seal.
For optimal installation, ensure the pipe end is clean and cut square using a pipe cutter. Insert the pipe firmly into the Hep2O push-fit end until it reaches the stop; if the joint is difficult to insert, double-check for debris. While the connectors are maintenance-free, it is recommended to periodically inspect them for signs of external wear or dampness during routine plumbing checks. Do not use chemical pipe cleaners or aggressive lubricants on the push-fit mechanism, as these can degrade the internal seals.
