Demountable Coupling - 1.5 inch 43mm
Best current price£6.49from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£6.49Visit shop B&Q - 1.5" 43mm Demountable Coupling Solvent Weld
Visit shopB&Q£6.49Visit shop All Offers
2 offers from £6.49
View price history by clicking the chart icon.
Product Information
Full details
The Aquacadabra 1.5-inch 43mm demountable union is an essential component for pond enthusiasts and DIY hobbyists looking to simplify the maintenance of their water systems. By allowing you to easily disconnect equipment such as UV clarifiers, pumps, and external filters, it eliminates the need to cut pipework during servicing; however, users should note that a high-quality solvent cement is mandatory to ensure a permanent, leak-free connection during the initial installation.
All features
| Model Part Number | 1.5" 43mm |
|---|---|
| Brand | Aquacadabra |
Extended Product Information
FAQs
Does this union fit standard 43mm pipes?
Yes, this coupling is specifically designed for 43mm solvent weld piping.
Can I use this for non-pond plumbing?
While designed for pond environments, it is compatible with any standard 43mm solvent weld pressure plumbing system.
Do I need any special tools for installation?
You will need solvent cement specifically designed for PVC/ABS pipework and potentially a hacksaw to ensure your pipe ends are cut straight.
Is the O-ring replaceable?
The O-ring is a standard size, but the union is designed as a single durable unit. Always ensure the O-ring is kept clean to maintain the seal.
Can I connect this to a hose tail?
Yes, this union is compatible with standard 43mm hose tails, provided they are designed for solvent weld connection.
How long should I wait before running water through the pipes?
It is highly recommended to wait 24 hours to allow the solvent cement to fully cure and achieve maximum bond strength.
Troubleshooting
The union is leaking at the threaded center.
Unscrew the union, inspect the rubber O-ring for debris, damage, or improper seating, and ensure it is cleaned and positioned correctly before tightening.
The fitting is leaking at the pipe connection.
This indicates an incomplete solvent bond. Drain the system, dry the area thoroughly, and re-apply solvent cement to the joint.
The union will not unscrew.
Check that no solvent cement has accidentally spilled onto the threads during installation. If the nut is jammed, use a pair of channel locks with a cloth to protect the plastic and gently apply torque.
Pros and Cons
Pros
- Simplifies routine maintenance for pond equipment
- Eliminates the need to cut pipes for equipment removal
- Compatible with standard 43mm solvent weld systems
- Durable construction suitable for outdoor use
Cons
- Requires solvent cement for permanent installation
- Not suitable for threaded or compression fittings without adapters
- Must be installed with care to ensure the thread remains free of adhesive
Setup, Compatibility & Care
To install, ensure both the pipe end and the socket of the union are clean and free of debris. Apply a uniform layer of solvent cement to the exterior of the pipe and the interior of the union socket. Insert the pipe into the fitting and give it a quarter turn to distribute the cement evenly. Allow at least 24 hours for the solvent to cure fully before introducing water pressure. Do not apply solvent cement to the threaded union nut or the o-ring seating area; if these surfaces become contaminated with glue, the union will not unscrew later. For long-term care, occasionally inspect the o-ring for debris or signs of wear, ensuring it remains lubricated for a perfect seal.