Ronseal Diamond Clear Satin Wood Floor Varnish - 5L

This clear floor varnish from the Ronseal Diamond range can be applied to interior using a brush. ...

Best current price£7.57from B&Q

Colour

All Offers

84 offers from £7.57 - £115.81

View price history by clicking the chart icon.

B&QB&Q - Door Oil 3060 Clear Satin5Ml
Free delivery in 1–3 days
£7.57
Visit shop
RackhamsRackhams Decking Oil - Teak (Clear) 007 - 125Ml
Free delivery in 1–3 days
£18.25
Visit shop
Power Tools DirectLiberon 126852 Natural Finish Floor Varnish Clear Matt 1 Litre
£5.95 delivery
£19.31
Visit shop
Blueperry agriculture (UK)Liberon Natural Finish Floor Varnish Clear Matt 1 L 126852
Free delivery in 1–3 days
£20.88
Visit shop
eBayLiberon Natural Finish Floor Varnish Clear Matt 1 litre
£3.50 delivery
£21.14
Visit shop

Product Information

Full details

This guide is for anyone looking to apply Ronseal Diamond Wood Floor Varnish - Clear - Satin - 5L to their interior wooden floors. The key benefit of this varnish is its quick-drying, low-odor formula that provides a durable, satin finish. However, it's important to note that proper surface preparation is crucial for optimal results.

All features

Model Part NumberDHFVS5L
BrandRonseal

Extended Product Information

FAQs

How much area will one can of varnish cover?

On average, one litre of varnish will cover up to 18 m².

How long does it take for the varnish to dry?

It typically dries in approximately 30 minutes.

Can this varnish be used on exterior surfaces?

No, this varnish is designed for interior use only.

How many coats of varnish are recommended?

Two coats are generally recommended for optimal durability, but you may apply more coats for areas with higher wear.

What kind of brush should I use?

Use a brush suitable for applying varnish, ideally with synthetic bristles.

How do I clean the brush after use?

Clean the brush with a suitable brush cleaner.

Can I apply this varnish over existing varnish?

It's best to remove any existing coatings first to ensure proper adhesion.

Is sanding required between coats?

Yes, light sanding with fine sandpaper between coats is recommended for a smoother finish.

Troubleshooting

Varnish is not drying properly.

Ensure adequate ventilation and check the room temperature. Make sure the previous coat is fully dry before applying another one.

The finish is not even.

Ensure even application with a brush, and avoid applying too much varnish in one area.

The varnish is bubbling.

Avoid shaking the varnish before use and ensure the surface is clean from contaminants.

Pros and Cons

Pros

  • Quick drying time minimizes downtime.
  • Low odor makes it suitable for use in occupied spaces.
  • Provides a durable and long-lasting satin finish.
  • Easy to apply with a brush.
  • Good coverage rate helps to reduce the amount of product needed.

Cons

  • Requires proper surface preparation for optimal results.
  • May require multiple coats for desired finish.
  • Coverage can vary based on wood type and application method.
  • Not suitable for exterior use.

Setup, Compatibility & Care

  1. Preparation:
  • Ensure the surface is clean, dry, and free from any previous coatings (wax, oil, etc.).
  • Sand the floor to create a smooth surface, and remove all dust.
  • Fill any cracks or imperfections with a suitable wood filler.
  1. Application:
  • Stir the varnish thoroughly before use.
  • Apply the first coat evenly with a brush, following the wood grain.
  • Allow to dry for approximately 30 minutes.
  • Lightly sand the surface with fine sandpaper.
  • Apply a second coat for added protection and durability.
  1. Compatibility:
  • Suitable for use on most interior wooden floors.
  • Always test on a small, inconspicuous area first to ensure compatibility and desired finish.
  1. Care:
  • Clean spills immediately.
  • Sweep or vacuum regularly to remove dirt and debris.
  • Use appropriate floor cleaning products; avoid harsh chemicals.

Similar items

Price History

DatePrice
Visit shop