Best current price£50.85from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£50.85Visit shop Beyond Paint All-In-One Refinishing Paint No Sanding Matte Finish For Cabinets Countertops Furniture And Doors 1 Pint Soft Gray 859730006383
Visit shop1 offer from £50.85
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and homeowners looking to quickly refresh cabinets, countertops, furniture, and doors without extensive prep work. The key benefit is a no-sand, no-prime, no-strip application for a professional-looking matte finish. A potential caveat is that coverage is approximately 5 sq. ft. per pint with two coats, so proper quantity estimation is important. This all-in-one refinishing paint offers self-leveling properties for an easy application and a smooth, durable result.
| Colour | Grey |
|---|---|
| Model Part Number | BP40 |
| Brand | Beyond Paint |
The product is formulated as an all-in-one solution, meaning sanding and priming are typically not required. However, ensuring the surface is exceptionally clean and free of any residue is critical for optimal adhesion.
The paint is typically dry to the touch within 1-2 hours. It requires about 24 hours for light use and 7 days to fully cure and achieve maximum hardness.
Yes, it can be used on countertops, but for enhanced durability against daily wear and tear, it is highly recommended to use the Beyond Paint Multi-Purpose Sealer as a top coat after the paint has cured.
Each pint covers approximately 5 square feet with two coats.
For routine cleaning, use a soft cloth with a mild detergent. Avoid using abrasive cleaners or scrub pads, as these can damage the matte finish.
High-quality synthetic brushes or high-density foam rollers are recommended for a smooth, even finish. Avoid standard bristle brushes which can leave marks.
Yes, once fully cured, this paint should accept most standard paint types. However, always test in an inconspicuous area first.
Ensure the surface was thoroughly cleaned and dried before application. Remove any loose paint, clean the surface again, and reapply. For difficult surfaces, a specialized primer might be necessary (though contrary to the product's no-prime claim, this can resolve adhesion issues).
Apply paint in thinner coats and avoid over-brushing. Allow the self-leveling properties to work. If brush marks persist, a high-density foam roller may provide a smoother finish.
Ensure the paint is thoroughly mixed. Apply subsequent coats perpendicular to the previous one and ensure even thickness. Coverage is approximately 5 sq. ft. per pint for two coats, so ensure sufficient paint is available.
This can indicate a thick application or high humidity. Ensure thin coats are applied and allow for proper drying conditions (average temperature and humidity). If the issue persists after several days, gently buff with a fine-grit sandpaper and reapply a thin coat.
Setup: Ensure the surface to be painted is clean, dry, and free from grease, wax, or any contaminants. Lightly wipe with a damp cloth and allow to dry completely. Stir the paint thoroughly before and during use.
Compatibility: This paint is designed for cabinets, countertops, furniture, and doors. It adheres well to laminate, wood, metal, and previously painted surfaces. For porous surfaces like raw wood, ensure they are properly sealed before application if needed.
Care: For best results, apply in thin, even coats using a high-quality synthetic brush or foam roller. Avoid overworking the paint. Allow 24 hours for the paint to cure before light use and 7 days for full hardness. Clean tools and spills immediately with soap and water. For routine cleaning of painted surfaces, use a soft cloth and mild detergent. Avoid abrasive cleaners.
