PMD Personal Microderm Pro - Mermaid
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The PMD Personal Microderm Pro is designed for individuals seeking to achieve professional-level microdermabrasion results at home. Its key benefit is visibly fresher, more radiant skin by reducing the appearance of fine lines, wrinkles, blemishes, and enlarged pores with regular use. A potential caveat is the need for consistent weekly treatments to see optimal results.
All features
| Model Part Number | 1001-MerBluePro |
|---|---|
| Brand | PMD Beauty |
Extended Product Information
FAQs
How often should I use the PMD Personal Microderm Pro?
For best results, it is recommended to use the PMD Personal Microderm Pro once per week. Allow your skin at least 7 days to recover between treatments.
What is the difference between the Low and High speed settings?
The Low speed setting is ideal for beginners or those with more sensitive skin, offering a gentler exfoliation. The High speed setting provides a more intense treatment, suitable for experienced users or those targeting specific concerns.
How do I choose the right exfoliation disc?
The device typically comes with a variety of discs. Beginners or those with sensitive skin should start with the Pink (Ultra-Fine) or White (Extra-Fine) discs. As your skin adjusts, you can move to the Blue (Fine) or Green (Medium) discs for deeper exfoliation. Red (Coarse) discs are for body areas or very resilient skin.
Can I use the PMD Personal Microderm Pro on active breakouts?
It is generally not recommended to use the device on active acne or inflamed blemishes, as it could spread bacteria and worsen the condition. It's best to wait until active breakouts have healed.
How long does a treatment session typically take?
A full facial treatment with the PMD Personal Microderm Pro usually takes between 3-5 minutes.
Do I need to use a special skincare routine after treatment?
After treatment, apply a hydrating serum and moisturizer. Avoid using products with harsh ingredients like retinoids or strong acids for at least 24-48 hours to allow your skin to recover.
How do I know when to replace the exfoliation discs?
The discs are designed for single use or limited multiple uses depending on the disc type and intensity of use. If you notice the disc becoming worn down, less effective, or damaged, it's time to replace it.
Troubleshooting
Device not turning on
Ensure the power cord is securely plugged into the device and a working electrical outlet. Check if the power switch is in the 'on' position.
Weak suction power
Make sure the cap is properly attached and sealed. Check the exfoliation disc for any obstructions. Ensure the air intake holes are not blocked.
Skin irritation or excessive redness after use
You may be using too much pressure or staying on one area for too long. Reduce pressure, use shorter strokes, and ensure you are using the correct disc for your skin type. If irritation persists, discontinue use and consult a dermatologist.
Disc not spinning properly
Ensure the disc is correctly seated and that there is no debris preventing its rotation. Check the device for any internal obstructions.
Pros and Cons
Pros
- Achieves professional microdermabrasion results at home.
- Reduces the appearance of fine lines, wrinkles, and blemishes.
- Minimizes the look of enlarged pores.
- Customizable treatment with dual speeds and varied discs.
- Leaves skin feeling fresh and looking radiant.
Cons
- Requires consistent weekly use for best results.
- May cause temporary redness or sensitivity, especially with higher settings or coarser discs.
- Initial learning curve to find optimal settings and technique.
- Discs are consumable and will need replacement over time.
- Not suitable for all skin conditions or active breakouts without professional consultation.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the device is clean and dry.
- Select the appropriate exfoliation disc based on your skin type and treatment goals. Insert the disc into the device.
- Choose a Smooth Glide Cap and attach it securely.
- Plug in the device and select your desired speed setting (Low or High).
Compatibility:
- The PMD Personal Microderm Pro is designed for at-home use on the face and body.
- It is compatible with most skincare routines, but it's recommended to avoid using other strong exfoliants or active ingredients immediately before or after treatment.
- Consult a dermatologist if you have sensitive skin, active acne, rosacea, or other skin conditions before use.
Care:
- After each use, unplug the device.
- Remove the cap and clean it thoroughly with soap and water. Ensure it is completely dry before reattaching.
- Wipe the exterior of the device with a slightly damp cloth. Do not submerge the device in water.
- Store the device and its accessories in a cool, dry place.