Best current price£142.02from eBay
Shopping.co.uk recommended and popular offers
eBay£142.02Visit shop Laser Tools 1/4"" Hex Drive Deep Nut Driver & Setter Socket Tool Set 18pc 9249
Visit shop3 offers from £142.02
View price history by clicking the chart icon.
This 18-piece tool set from Laser Tools is designed for professionals tackling applications like suspended ceilings, cable nuts, and brake rod adjuster nuts. Its primary benefit is the versatile Go Thru socket system and long driver, enabling access to recessed fasteners. A potential caveat is that the specialized nature of the sockets may require users to confirm compatibility with their specific nut sizes.
| Model Part Number | 9249 |
|---|---|
| Brand | Laser Tools |
The 'Go Thru' design allows the fastener's threaded rod to pass completely through the socket. This is crucial for working with nuts on long bolts or threaded rods where the end of the thread would otherwise prevent a standard socket from seating fully.
The set includes 16 Go Thru sockets with a Single Hex (6pt) profile, covering metric sizes from 8mm to 22mm.
The 1" die socket is typically used for cleaning or re-threading damaged threads on a bolt or rod of approximately 1-inch diameter. It requires a compatible threading tool to operate.
The driver is 315mm long, providing extended reach for accessing nuts in recessed or difficult-to-access areas.
The set is designed for standard hex nuts. The 6-point profile is versatile, but it may not be effective on severely damaged, rounded, or unusually shaped fasteners.
The set comes in a durable blow mould case, which is designed for organized storage and protection of all components. It is recommended to keep the tools in this case when not in use.
Verify you are using the correct metric socket size for the nut. Ensure the nut is a standard hex profile and not damaged or rounded.
Ensure the socket's drive end is clean and free of debris. Test the chuck mechanism for any obstructions and ensure it is fully opened before inserting the socket.
Check that the socket is fully seated in the chuck and that no debris is interfering with the sleeve's movement. Light lubrication may be applied to the sleeve mechanism if necessary, but avoid over-application.
Confirm that the threaded portion of the fastener is passing completely through the Go Thru socket. The design is intended for this to happen; ensure sufficient length of thread is available.
Setup: This tool set requires no complex setup. Simply select the appropriate Go Thru socket size for the nut you are working with. Attach the socket to the driver's quick chuck end. Ensure the socket is securely engaged before applying torque. For the 1" die socket, ensure it is correctly mounted on a compatible threading tool if used for cutting or cleaning threads.
Compatibility: The Go Thru sockets are designed for standard hex nuts. The 6-point profile is suitable for most hex nuts but may not be ideal for rounded or damaged fasteners. The 1" die socket's compatibility depends on the threading tool it is intended to be used with.
Care: To maintain the longevity of the tool set, clean the sockets and driver after each use to remove dirt and debris. Store all components in the provided durable blow mould case to prevent loss and protect against damage. Avoid using excessive force or impact on the sockets, especially when dealing with damaged nuts, as this could compromise the tool or fastener.
