National Skirting Stockholm Primed Skirting Board - White

Yes, the moisture-resistant MDF construction makes it ideal for bathrooms and other areas with high humidity.

The board comes primed and ready for paint or gloss. While it can be installed as is for a basic look, painting it is recommended to achieve a finished appearance and provide better protection.

You can use most water-based or oil-based interior paints or gloss finishes. Ensure good adhesion by preparing the surface correctly and applying thin coats.

Each board measures 4.2 meters in length.

The skirting board is 18mm thick and 70mm wide.

While MDF is generally stable, extreme temperature fluctuations can affect it. It's advisable to check with your underfloor heating system manufacturer for specific recommendations regarding skirting board materials.

FSC-certified means the wood used in the MDF comes from forests that are managed responsibly, adhering to strict environmental, social, and economic standards.

Ensure the wall surface is clean, dry, and free from dust or grease. Apply an adequate amount of strong, suitable adhesive. For heavier boards or uneven walls, consider using finishing nails for extra support while the adhesive cures.

Use a sharp, fine-tooth saw blade designed for MDF or laminate. Ensure the board is securely supported during cutting to prevent vibration. A light sanding with fine-grit sandpaper can smooth minor imperfections.

Ensure the primed surface was clean and dry before painting. Apply thin, even coats rather than one thick coat. If peeling occurs, the surface may not have been properly prepared; remove loose paint, sand lightly, and reapply paint.

Use a flexible filler or caulk designed for interior use to fill any small gaps. For larger gaps, consider shimming the board during installation or using a more substantial filler.