Simoniz Red Oxide Primer - 500ML

The Simoniz Red Oxide Primer is suitable for use on car bodies, metal, wood, and plastic.

Clean the surface thoroughly, removing any rust, dirt, or grease. Lightly sand the surface to improve adhesion.

Allow the primer to dry completely before painting. Drying times vary, so refer to the can's instructions.

Generally, it is not necessary to sand the primer unless there are imperfections. However, light sanding can improve adhesion of the top coat.

One or two coats are usually sufficient. For heavily rusted areas, multiple coats may be necessary.

Check the expiration date on the can. Store the primer in a cool, dry place to prolong its shelf life.

Yes, this primer is suitable for use on plastic surfaces.

Ensure the surface is properly cleaned and prepared. Lightly sand the surface to improve adhesion. Check the primer's expiration date.

Apply thinner coats and avoid holding the spray nozzle too close to the surface. Shake the can well before use.

Remove all rust before priming. Multiple coats of primer may be necessary for heavily rusted areas.