Shimano Deore XT M8200 Wheel - 29 Inch - 15x110mm

Best current price£195.49from Tweeks Cycles
Best offers
Shopping.co.uk recommended and popular offers
Tweeks Cycles£195.49Visit shop Shimano XT M8200 Deore XT Wheel - Front29 Inch
Visit shop
Best current price£195.49from Tweeks Cycles
Shopping.co.uk recommended and popular offers
Tweeks Cycles£195.49Visit shop Shimano XT M8200 Deore XT Wheel - Front29 Inch
Visit shop2 offers from £195.49 - £210.07
View price history by clicking the chart icon.
The Shimano Deore XT M8200 29-inch front wheel is designed for dedicated enduro and trail mountain bikers who prioritize durability and lateral stiffness on technical terrain. Its standout benefit is the 30mm internal rim width which offers superior tire support and enhanced grip, though potential buyers should note that this specific model is tailored exclusively for 15x110mm Boost spacing.
| Model Part Number | WHM8200FB1529 |
|---|---|
| Brand | Shimano Deore XT |
Yes, but you will need to purchase a Centre-Lock to 6-bolt disc rotor adapter.
Typically, these wheels are shipped rim-tape ready, but you should verify with your specific retailer if you require additional tubeless supplies.
The 30mm internal width is optimized for tires between 2.3 and 2.6 inches in width.
You should check for axle play every few months or after significant bike park usage; adjust only when play is detected.
No, this wheel is specifically designed for 110mm width spacing and will not fit standard 100mm forks.
Adjust the bearing pre-load on the hub using the manufacturer's specified tool until all play is eliminated without increasing rotational resistance.
Check that your rim tape is properly seated without air bubbles, and ensure you are using a high-volume pump or air compressor for the initial 'pop' to seat the beads.
Verify that your axle is tightened to the recommended torque specification and check for loose spokes that may require tensioning.
This wheel is designed for frames and forks utilizing the 15x110mm (Boost) standard. When setting up the wheel, ensure you are using a Centre-Lock compatible disc rotor; if you currently use 6-bolt rotors, you will need a Centre-Lock adapter. For tubeless setup, apply high-quality rim tape and a tubeless valve stem, then seat the tire using a floor pump or compressor. Routine care should include cleaning the wheel with mild soap and water—avoid high-pressure washers, which can force debris past the bearing seals. Periodically check the spoke tension and adjust the hub pre-load to prevent play from developing in the axle.