Shimano FD-6800 support bolt and plate - Shimano Spares - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for cyclists who need to replace the Shimano FD-6800 support bolt and plate. The key benefit is getting your front derailleur working correctly again, ensuring smooth and efficient gear changes. Keep in mind that this is a replacement part and requires some mechanical knowledge for installation.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 4524667673194 |
| Brand | SHIMANO |
Extended Product Information
FAQs
What tools do I need to install this part?
You'll typically need a hex wrench (Allen key) to remove and install the bolt, and potentially a screwdriver for limit screw adjustments.
Is this part covered under warranty?
This product is covered by the Shimano warranty, please contact the retailer for details on the specific terms.
What material is the bolt and plate made of?
The bolt and plate are made of durable metal alloys designed to withstand the stresses of cycling.
Can I use this on a different model of Shimano front derailleur?
No, this support bolt and plate is specifically designed for the Shimano FD-6800 model only.
How do I know if the bolt and plate need replacing?
If your front derailleur shifting is erratic or the bolt is damaged or missing, it's time for a replacement.
Where can I find the torque specifications for the bolt?
The torque specifications can be found in the Shimano FD-6800 technical manual, available online or from your local bike shop.
Troubleshooting
Front derailleur not shifting properly after installation.
Check the cable tension and adjust the front derailleur limit screws. Ensure the derailleur is properly aligned with the chainrings.
Bolt loosens over time.
Tighten the bolt to the manufacturer's recommended torque specifications. Use thread locker if necessary.
Pros and Cons
Pros
- Genuine Shimano part ensures quality and compatibility.
- Restores front derailleur functionality.
- Easy to install with basic tools.
- Durable construction for long-lasting use.
Cons
- Requires some mechanical knowledge for installation.
- Only compatible with Shimano FD-6800 front derailleurs.
- Does not include other components.
- Small part, may be easy to misplace.
Setup, Compatibility & Care
Setup:
- Remove the old support bolt and plate from your FD-6800 front derailleur.
- Clean the area where the new bolt and plate will be installed.
- Install the new Shimano FD-6800 support bolt and plate.
- Ensure the bolt is tightened to the manufacturer's recommended torque specifications (refer to the Shimano FD-6800 technical manual).
- Check the front derailleur's alignment and adjust if necessary.
Compatibility:
- This part is specifically designed for the Shimano FD-6800 front derailleur.
- Ensure your front derailleur model matches before purchasing.
Care:
- Regularly inspect the front derailleur for wear and tear.
- Clean the derailleur with a degreaser and a clean cloth.
- Lubricate the derailleur pivot points after cleaning. Use a suitable bicycle lubricant.