US PRO Tools Jiggle Self Priming Syphon Hose Siphon Pump Fuel Transfer - 12mm x 1.8M
A self priming 12mm (1/2") transfer siphon hose suitable for siphoning fuels and other kinds of li...A self priming 12mm (1/2") transfer siphon hose suitable for siphoning fuels and other kinds of liquids that eliminates the need for mouth contact. Ideal for dispensing fuel, oils, non-corrosive liquids and adhesives from barrels, tanks and oil drums. Comes with a copper nozzle and a 1.8 metre (6ft) PVC hose. Start the flow of liquid by jiggling the nozzle up and down at a rate of once per second. Once the flow has started ensure the copper head remains in contact with the bottom of the container. The receiving container needs to be lower than the source. Ideal for water, petrol, diesel, thick oil, paint, etc. This is a self priming jigging hand siphon pump pipe hose for diesel, fuel, oil, and water transfer.
This guide is for anyone needing to transfer liquids like fuel, oil, and water without the mess or the risk of mouth contact. The US PRO Tools Jiggle Self Priming Syphon Hose makes transferring liquids easy and safe by eliminating the need for mouth contact. However, remember that the receiving container must be lower than the source container for the siphon to work effectively.
All features
Model Part Number
5049
Brand
us pro
Extended Product Information
FAQs
What liquids can I use this siphon for?
You can use it for water, petrol, diesel, thick oil, and paint, among other non-corrosive liquids.
How do I start the siphon?
Start the flow of liquid by jiggling the nozzle up and down at a rate of once per second.
Does the receiving container need to be at a certain level?
Yes, the receiving container needs to be lower than the source container for the siphon to work.
What is the length of the hose?
The hose is 1.8 metres (6ft) long.
What is the diameter of the hose?
The hose has a diameter of 12mm (1/2").
Can I use this siphon with corrosive liquids?
No, it is not recommended for use with corrosive liquids.
How do I clean the siphon?
Rinse the hose with a suitable cleaning agent after use, depending on the liquid transferred. Avoid abrasive cleaners.
Troubleshooting
Siphon not starting.
Ensure the receiving container is lower than the source and jiggle the nozzle more vigorously. Check for any air leaks in the connections.
Slow flow rate.
Make sure the hose is not kinked or blocked. Ensure the hose is fully submerged in the liquid. Try jiggling the nozzle more frequently.
No liquid is flowing
Ensure the copper head remains in contact with the bottom of the source container.
Pros and Cons
Pros
Safe transfer of liquids without mouth contact.
Easy to use with a simple jiggling action.
Suitable for a wide range of liquids.
Durable copper nozzle and PVC hose construction.
Cons
Requires the receiving container to be lower than the source.
Not suitable for corrosive liquids.
Flow rate may vary depending on the liquid viscosity.
Requires some initial setup and understanding of the jiggling technique.
Setup, Compatibility & Care
Setup: Connect the copper nozzle to the hose. Make sure both are securely fitted.
Compatibility: The hose is compatible with water, petrol, diesel, thick oil, and paint. Ensure the liquids are non-corrosive.
Operation: Place the source container higher than the receiving container.
Starting: Start the flow by jiggling the nozzle up and down at a rate of once per second.
Care: After use, rinse the hose with a suitable cleaning agent depending on the transferred liquid. Store in a clean and dry place. Avoid using abrasive cleaners.