Dremel 952 Grinding Stones - Aluminium Oxide - 9.5mm - Pack of 3

These aluminium oxide grinding stones are suitable for sharpening, deburring, and general grinding on most materials, including various metals and stainless steel.

The Dremel 952 Grinding Stones have a maximum recommended RPM of 25,000 1/min. Always operate your Dremel Multi-Tool within this limit for safety and optimal performance.

Yes, they are excellent for sharpening tools like knives, scissors, and chisels. It's crucial to use a light touch and maintain the correct angle to avoid removing too much material or damaging the edge.

To extend the life of your grinding stones, avoid excessive pressure, use appropriate RPM settings for the material, clean them after use to prevent clogging, and store them properly.

These grinding stones are compatible with Dremel Multi-Tools that can accommodate a 3.2 mm shank diameter.

The Dremel 952 Grinding Stones come in a pack of three (3).

Ensure you are not applying too much pressure; let the tool do the work. Also, verify the RPM setting is appropriate for the material and not too high. The stone might also be glazed or clogged; try dressing it to expose fresh abrasive material.

Check that the grinding stone is securely tightened in the collet to prevent wobble. Ensure your hand is steady and apply consistent, even pressure. If the stone is worn unevenly, replace it.

This often indicates too much pressure or prolonged contact in one spot. Reduce pressure, move the tool more consistently, and allow the stone to cool down. Ensure the RPM is not excessively high for the task.

Confirm your Dremel Multi-Tool uses a 3.2 mm collet. If it's a different size, you may need a different collet or adapter. Ensure the collet is clean and free of debris before inserting the shank.