Hettich Sensys W45 8639i Hinge - Multicolor

No, mounting plates are not included and must be purchased separately. Ensure you select the correct type of mounting plate compatible with your cabinet construction.

The Hettich Sensys W45 hinge is designed for door thicknesses ranging from 15 mm to 28 mm.

The hinges feature integrated overlay and depth adjustment screws. Height adjustment is typically done at the mounting plate. Refer to the 'Setup, Compatibility & Care' section for detailed instructions.

The Hettich Sensys W45 hinge has an opening angle of 95 degrees.

This specific model, the W45, is optimized for 45-degree corner cabinets with an overlay application. For other cabinet types or configurations, different Sensys models might be more suitable.

The 'integrated Silent System' refers to the built-in damping mechanism that allows doors to close gently and quietly, preventing them from slamming shut.

The hinge requires a TH-drilling pattern of 52 x 5.5 mm for the hinge cup in the door.

Ensure the integrated soft-close mechanism is functioning. Check if the door is too heavy for the hinge's rating or if there are obstructions preventing smooth closure.

Verify that the hinge is properly installed and that all screws are tight. Occasionally, a small amount of appropriate lubricant may be applied to the pivot points if necessary, but often noise indicates a misalignment or a defect.

Utilize the integrated overlay and depth adjustment screws on the hinge, as well as height adjustment at the mounting plate, to achieve proper alignment. Refer to the setup section for adjustment details.

Check for any binding or obstruction. Ensure the door thickness is within the specified range (15-28 mm) and that the hinge is correctly seated in its mounting plate and cup.