SDS-Plus Drill Chuck Adapter - GARHWAL
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This GARHWAL SDS-Plus Drill Chuck Adapter is designed for DIY enthusiasts and professionals seeking to expand the versatility of their SDS-plus hammer drills. Its key benefit is enabling the use of standard round-shank drill bits in SDS-plus machines, offering a clamping range of 1.5-13 mm. A key caveat is that this accessory does not possess an impact function, meaning it's suited for drilling and clamping, not hammer drilling itself. Key features include a durable all-metal construction, a quick-release keyless chuck, and compatibility with SDS-plus machines.
All features
| Brand | GARHWAL |
|---|
Extended Product Information
FAQs
Can I use this adapter for hammer drilling?
No, this accessory is designed for drilling and clamping only. It does not have an impact function and should not be used with the hammer setting on your drill.
What size drill bits can I use with this chuck?
The chuck has a clamping range of 1.5 mm to 13 mm, suitable for most standard round-shank drill bits within this size range.
Does this adapter come with a chuck key?
Yes, the product includes one chuck key for tightening the drill bits into the keyless chuck.
How do I attach the adapter to my SDS-plus drill?
Insert the SDS adapter end into the SDS-plus mount on your drill and twist/push until it locks. Refer to the setup section for detailed steps.
What material is the chuck adapter made of?
The GARHWAL SDS-Plus Drill Chuck Adapter is made of durable solid metal.
Can I use this with any drill?
No, this adapter is specifically designed for drills and hammer drills that feature an SDS-plus mount.
Troubleshooting
Drill bit is not securely clamped
Ensure the chuck is fully tightened using the chuck key. Check if the drill bit shank is within the 1.5-13 mm clamping range and is inserted correctly into the chuck jaws.
Adapter does not fit SDS-plus mount
Verify that your drill machine is indeed an SDS-plus model. Ensure there are no obstructions in the SDS-plus mount on the drill or on the adapter.
Chuck is difficult to open or close
Clean the chuck mechanism to remove any debris. Apply a small amount of light oil if necessary, but avoid excessive lubrication.
Chuck key doesn't engage properly
Ensure you are using the correct chuck key provided with the adapter. Check the key and the chuck's keyholes for any damage or misalignment.
Pros and Cons
Pros
- Increases the versatility of SDS-plus tools by allowing standard drill bits.
- Durable construction suitable for professional use.
- Keyless design offers convenience and speed during bit changes.
- Wide clamping range accommodates various drill bit sizes.
- Easy to install and use with SDS-plus machines.
Cons
- Does not have an impact function; not suitable for hammer drilling applications.
- Adds weight to the drill setup.
- Requires a separate chuck key for initial tightening.
- May not be compatible with all SDS-plus tools if dimensions vary slightly.
Setup, Compatibility & Care
Setup:
- Ensure your SDS-plus hammer drill is switched off and unplugged.
- Remove any existing SDS-plus drill bit.
- Insert the SDS adapter end of the chuck into the SDS-plus mount on your drill.
- Twist and push the adapter until it locks securely into place.
- Use the included chuck key to open the keyless chuck and insert your desired round-shank drill bit.
- Tighten the chuck firmly using the chuck key.
Compatibility:
- Primarily designed for hammer drills and drills with an SDS-plus mount.
- Clamping range: 1.5 mm to 13 mm.
- Shank type: Round shank drill bits.
- Note: This adapter is not compatible with machines that have a standard chuck mount or require a different tool holder system.
Care:
- Keep the chuck clean and free from dust and debris.
- Periodically check the jaws for any damage or wear.
- Store in a dry place when not in use.
- Avoid using the accessory in hammer mode, as it is not designed for impact.