Best current price£74.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£74.99Visit shop B&Q - 5W30 Fully Synthetic Engine Oil Multivis Adt Mid Saps C3 Dexos2 2X5L
Visit shop1 offer from £74.99
View price history by clicking the chart icon.
This guide is for owners of modern petrol and diesel vehicles, particularly those equipped with exhaust after-treatment systems like DPFs and Adblue. The Morris Multivis ADT C3 5W-30 offers enhanced engine efficiency and protection, especially during cold starts. A key consideration is ensuring your vehicle's manufacturer specifies a 5W-30 C3 oil for optimal performance and warranty compliance.
| Model Part Number | MULTIVISADTC35W-30 |
|---|---|
| Brand | Morris Lubricants |
'Mid-SAPS' refers to the oil having reduced levels of sulphated ash, phosphorus, and sulphur. This is essential for protecting modern exhaust after-treatment systems like Diesel Particulate Filters (DPFs) and catalytic converters.
It is strongly recommended to only use this oil if your vehicle manufacturer specifically requires a 5W-30 oil with ACEA C3, ACEA C2, MB 229.31/229.51, PSA B71 2290 (2014), API SN, or dexos2 specifications. Using the wrong oil can damage your engine and void your warranty.
Refer to your vehicle's owner's manual for the recommended oil change interval. This can vary depending on the vehicle model, driving conditions, and manufacturer's service schedule.
This oil is designed for modern petrol and diesel engines, particularly those with after-treatment systems. It may not be suitable for older engines that require different oil specifications or higher levels of traditional additives.
The '5W' indicates the oil's viscosity at cold temperatures (winter), and '30' indicates its viscosity at operating temperatures. A 5W-30 oil is a popular choice for a wide range of climates and engines requiring a low-viscosity lubricant.
Yes, synthetic oils like Multivis ADT C3 5W-30 are formulated to reduce internal engine friction, which can contribute to improved engine efficiency and better fuel economy compared to conventional oils.
Check the engine oil level immediately. If low, top up with the correct oil. If the level is correct, the issue may be with the oil pressure sensor or pump; consult a mechanic.
This could indicate low oil pressure or insufficient lubrication. Check the oil level and condition. Ensure the correct viscosity oil is being used. If the problem persists, seek professional diagnosis.
While this oil is designed to minimize emissions, excessive smoke can indicate combustion issues or oil burning. Ensure the correct oil specification is used and check for potential engine problems.
This is often normal, as the detergent additives in the oil are cleaning the engine. As long as the level is correct and there are no other symptoms, it should not be a cause for concern.
Compatibility: Always consult your vehicle's owner's manual to confirm if Morris Multivis ADT C3 5W-30 is the correct specification for your engine. It is typically recommended for vehicles requiring ACEA C3, ACEA C2, MB 229.31, MB 229.51, PSA B71 2290 (2014), API SN, or dexos2 performance levels, and has an MB-Approval 229.60.
Setup: Replacing engine oil is a standard maintenance procedure. Ensure the engine is warm but not hot. Drain the old oil completely, replace the oil filter, and then refill with the correct quantity of Multivis ADT C3 5W-30 as specified in your manual. Dispose of old oil responsibly.
Care: Regularly check your engine oil level using the dipstick and top up if necessary between scheduled services. Adhere to the oil change intervals recommended by your vehicle manufacturer. Using the correct oil specification is crucial for maintaining engine health and warranty.
