Best current price£48.49from eBay
Shopping.co.uk recommended and popular offers
eBay£48.49Visit shop Heavy Duty 5pc Ball Joint Remover Splitter Separator Tie Rod End Remover Kit Set
Visit shop2 offers from £48.49
View price history by clicking the chart icon.
The Neilsen CT3100 5-piece separator set is an essential toolkit for automotive mechanics and dedicated DIY enthusiasts focused on suspension maintenance and chassis repair. Its primary benefit is the ability to safely and efficiently extract stubborn ball joints, tie rod ends, and pitman arms without damaging surrounding components. While this kit offers excellent leverage for heavy-duty applications, it is designed for manual use with a hammer and may require significant physical effort compared to powered hydraulic tools.
| Model Part Number | CT3100 |
|---|---|
| Brand | Neilsen |
Yes, provided you use an appropriate air hammer adapter that fits the shank of the fork.
These separators are intended for replacement tasks; they will likely crush the rubber boot during removal, so it is assumed you are discarding the old joint.
Measure the diameter of the ball joint shank and choose the fork size that provides the snuggiest fit around the shaft without forcing it.
Yes, the varied sizes included are designed to cover standard sizes found on most global automotive platforms.
Absolutely. Always wear safety glasses when using impact tools to protect against flying debris or metallic shards.
Apply a penetrating oil to the tapered seat and allow it to soak for 10-20 minutes before resuming.
Ensure the fork is pushed as far as possible onto the shaft to maintain maximum surface contact.
To ensure longevity, always match the fork size closely to the shank of the ball joint to avoid unnecessary stress or damage to the tool or vehicle parts. Before use, ensure the area is free of major debris and consider applying a penetrating oil to the joint 15 minutes before attempting removal. After use, clean the forks of grease and road grime using a solvent-based cleaner and lightly coat them with a rust-preventative oil before storing them in the kit case. Store the tools in a cool, dry environment to prevent corrosion.
